MIB Reference Guide

Fabric OS MIB Reference 207
53-1002750-01
Connectivity unit group
9
connUnitNumports
1.3.6.1.3.94.1.6.1.4
Read only Number of physical ports (between 0 and the maximum number of
system supported ports) in the connectivity unit (external).
The Brocade switches support 0 to maximum number of system
supported ports.
NOTE: The ConnUnitNumports will not count the GE ports present on
the FC4-16IP blade.
The maximum number of supported ports are as follows.
Brocade 300 24 ports
Brocade 4100 32 ports
Brocade 4900 64 ports
Brocade 5000 32 ports
Brocade 5100 40 ports
Brocade 5300 80 ports
Brocade 7500 or 7500E 32 ports
Brocade 7600 16 ports
Brocade 7800 Extension Switch 24 ports
Brocade 8000 32 ports
Brocade Encryption Switch 32 ports
Brocade DCX 640 ports
Brocade DCX-4S 320 ports
Brocade 48000 384 ports
Brocade 6505 24 ports
Brocade 6510 48 ports
Brocade 6520 96 ports
Brocade DCX 8510-4 Backbone 320 ports
Brocade DCX 8510-8 Backbone 640 ports
Brocade VA-40FC 40 ports
connUnitState
1.3.6.1.3.94.1.6.1.5
Read only Overall state of the connectivity unit.
Possible values are:
• unknown (1)
• online (2) - Set the state to online.
• offline (3) - Set the state to offline.
Mapped as follows:
switchState (ONLINE) 2 (online)
switchState (not ONLINE) 3 (offline, testing,
faulty)
connUnitStatus
1.3.6.1.3.94.1.6.1.6
Read only Overall status of the connectivity unit. This switch status is based on the
most severe status of contributors like Power supplies, Temperatures,
Fans, WWN servers, Standby CP, Blades, Flash, Marginal ports, Faulty
ports, Missing SFPs, and so on. switchStatusPolicyShow command
displays the policy parameters that determines the overall switch status.
Possible values are:
• unknown (1) - Unknown
• unused (2) - Unmonitored
• ok (3) - Healthy/ok
• warning (4) - Marginal/Warning
• failed (5) - Down/Failed
connUnitProduct
1.3.6.1.3.94.1.6.1.7
Read only The connectivity unit vendor's product model name.
This is the same as for sysDescr (set for as many as 79 bytes).
If the switch is in Access Gateway mode, the default value is Access
Gateway.
TABLE 75
Object and OID Access Description