MIB Reference Guide

Fabric OS MIB Reference 213
53-1002750-01
Connectivity unit group
9
connUnitPortEntry
1.3.6.1.3.94.1.10.1
Not
accessible
Each entry contains the information for a specific port.
connUnitPortUnitId
1.3.6.1.3.94.1.10.1.1
Read only The connUnitId value of the connectivity unit that contains this port.
Same value as connUnitId.
connUnitPortIndex
1.3.6.1.3.94.1.10.1.2
Read only Number of physical ports between 0 and maximum number of system
supported ports in the connectivity unit (internal/embedded, external).
To determine the maximum number of system supported ports, use the
SNMP GET command on swFcPortCapacity.
The Brocade switches support 0 to maximum number of system
supported ports. The maximum number of supported physical ports are
as follows:
NOTE: The following list does not includes the virtual ports. You can
create additional virtual ports in virtual fabrics.
Brocade 300 24 ports
Brocade 4100 32 ports
Brocade 4900 64 ports
Brocade 5000 32 ports
Brocade 5100 40 ports
Brocade 5300 80 ports
Brocade 7500 or 7500E 32 ports
Brocade 7600 16 ports
Brocade 7800 Extension Switch 24 ports
Brocade 8000 32 ports
Brocade Encryption Switch 32 ports
Brocade DCX 640 ports
Brocade DCX-4S 320 ports
Brocade 48000 384 ports
Brocade 6505 24 ports
Brocade 6510 48 ports
Brocade 6520 96 ports
Brocade DCX 8510-4 Backbone 320 ports
Brocade DCX 8510-8 Backbone 640 ports
Brocade VA-40FC 40 ports
TABLE 75
Object and OID Access Description