Administrator Guide
Table Of Contents
- Contents
- Preface
- About This Document
- Introducing EZSwitchSetup
- Setting Up Your Switch
- Managing Your Switch
- EZSwitchSetup Limitations
- Index
Connecting cables
1. Choose the method of connecting to your LAN.
You have the choice of using a serial connection or an Ethernet connection to your LAN to set the
IP address for the switch. The Ethernet connection is generally more convenient and preferred.
Use the serial connection if it is not possible or not convenient to connect the host on the same
subnet as the switch.
2. Click Next.
The Connect Cables window is displayed (
FIGURE 5
on page 14).
FIGURE 5 Connect Cables window (Ethernet version, without serial cable)
Setting Up Your Switch
14 EZSwitchSetup Administrator’s Guide
53-1002940-01