Reference Guide

Fabric OS Command Reference 1181
53-1002921-02
Chapter
3
Primary FCS Commands
In this chapter
•Primary FCS commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181
Primary FCS commands
Table 6 summarizes the commands that are available only on the primary Fabric Configuration
Server (FCS) when FCS policy is enabled.
TABLE 6 Primary FCS commands
Command Description
aliAdd Must be run from the primary FCS switch.
aliCreate Must be run from the primary FCS switch.
aliDelete Must be run from the primary FCS switch.
aliRemove Must be run from the primary FCS switch.
aliShow Can be run on all FCS switches.
cfgAdd Must be run from the primary FCS switch.
cfgClear Must be run from the primary FCS switch.
cfgCreate Must be run from the primary FCS switch.
cfgDelete Must be run from the primary FCS switch.
cfgDisable Must be run from the primary FCS switch.
cfgEnable Must be run from the primary FCS switch.
cfgRemove Must be run from the primary FCS switch.
cfgSave Must be run from the primary FCS switch.
cfgShow Can be run on all FCS switches.
cfgSize Must be run from the primary FCS switch.
cfgTransAbort Must be run from the primary FCS switch.
cfgTransShow Must be run from the primary FCS switch.
date This command can be run on all switches to view the current date. You can only
modify the date from the primary FCS switch.
defZone defzone --show can be run on all switches. All other options must be run from the
primary FCS switch.
msPlClearDB Must be run from the primary FCS switch.
msPlMgmtActivate Must be run from the primary FCS switch.