Reference Guide

1184 Fabric OS Command Reference
53-1002921-02
Command Admin Domain and Virtual Fabrics restrictions
A
4. Virtual Fabric availability: If Virtual Fabrics are enabled, commands are checked for context
and switch type as follows:
• Virtual Fabric context (VF) = Command applies to the current logical switch only, or to a
specified logical switch.
Virtual Fabric commands are further constrained by one of the following switch types:
- All Switches (All) = Command can be run in any switch context.
- Base Switch (BS) = Command can be run only on the base switch.
- Default Switch (DS) = Command can be run only on the default switch.
- N/A = Switch type is not applicable to the command.
• Chassis context (CH) = Command applies to the chassis on which it is executed.
• Switch and Chassis context (VF/CH) = Command applies to the switch and the chassis.
• Disallowed = Command cannot be executed when Virtual Fabrics are enabled.
5. Command-specific: Checks whether the command is supported on the platform for which it is
targeted.
NOTE
To determine RBAC permissions for a specified command and associated major options,use the
classConfig --showcli command. Refer to Chapter 1, “Using Fabric OS Commands” for more
information.
Command Admin Domain and Virtual Fabrics restrictions
TABLE 1 Admin Domain and Virtual Fabric restrictions for Fabric OS commands.
Command name Admin Domain Context Switch type
aaaConfig SwitchMember/ Allowed CH N/A
ad Allowed/Phys Fabric only Disallowed N/A
ag N/A/ Allowed/ SwitchMember VF All
agAutoMapBalance N/A VF All
agShow Allowed VF All
aliAdd Allowed VF All
aliCreate Allowed VF All
aliDelete Allowed VF All
aliRemove Allowed VF All
aliShow Allowed VF All
appLoginHistory SwitchMember VF All
aptPolicy SwitchMember VF All
auditCfg SwitchMember CH N/A
auditDump SwitchMember CH N/A
authUtil Allowed/ SwitchMember/
PortMember
VF All
bannerSet SwitchMember VF N/A