Reference Guide

Fabric OS Command Reference 209
53-1002921-02
cryptoCfg
2
- Rekey status: 0 = rekey in progress, 1 = no rekey in progress
- Key expiration time: date and time
- Time remaining to Auto Rekey: Displays key life for LUNs that
- are currently being rekeyed and after the rekey is complete.
- The remaining Key life period is displayed in the following format: num_yrs, num_months,
num_days, num_minutes.
When used with -cfg the --show -LUN command displays LUN configuration information:
• EE node: node WWN
• EE slot: slot number
• Target: target port WWN and node NWWN
• VT: virtual target port WWN and node WWN
• Number of hosts: numeric value
• Configuration status: committed or defined
• For each host:
- Host port WWN and node WWN
- Virtual initiator port WWN and node WWN
- Virtual initiator PID
• Number of LUNs
• For each LUN:
- LUN number: numeric identifier
- LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
- LUN status: numeric value
- Encryption mode: encrypt or cleartext
- Encryption format: native or DF compatible
- Tape policy type: pool-based or LUN-based
- Encrypt existing data: disabled or enabled
- Rekey: disabled or enabled
- Key ID state: Read, Write, or Key ID not applicable
- Key life (in days): numeric value
- Volume/pool label: user-defined label
- Rekey status: numeric value
If rekey- or tape sessions are in progress, the command shows the following information:
• Number of rekey sessions in progress: numeric value
• For each rekey session the display includes the following parameters:
- Rekey session number: numeric value
- Percent completion: numeric value
- Rekey state: Read or Write phase
Use the --show -rekey command to display all rekey sessions in progress on the current node or for a
specified container. The display includes the following information:
• Number of rekey sessions in progress: numeric value
• For each rekey session, the display includes the following parameters:
- Container name: user-define label
- EE node: node WWN
- EE slot: Slot number