Reference Guide

210 Fabric OS Command Reference
53-1002921-02
cryptoCfg
2
- Target: target port WWN and node WWN
- Target PID: target PID
- VT: virtual target port WWN and node WWN
- VT PID: virtual target PID
- Host (initiator) PWWN
- Host (initiator): node WWN
- Host (initiator) PID: hoist PID
- VI: virtual initiator port WWN and node WWN
- VI PID: virtual initiator PID
- LUN Number: numeric identifier
- LUN Serial Number: alpha-numeric identifier
- Percentage complete: numeric value
- Rekey state displays one of the following parameters:
 Read Phase
 Write Phase
 HA Sync Phase
 LUN Cleanup
- Rekey role: Primary or Backup
- Block Size: in KB
- Current logical block address (LBA) being processed: block address
Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to display
all rekey sessions in progress for a specific Crypto LUN/initiator pair of a specific CryptoTarget container.
The display includes the following information:
• LUN number: numeric ID
• LUN Serial Number (SN): alpha-numeric label
• CryptoTarget container Name: user-defined name
• Target: target port WWN and node WWN
• Target PID: target PID
• EE node name: node WWN
• EE slot: slot number
• Number of rekey sessions in progress: numeric value
• For each rekey session the display includes the following parameters:
- Rekey session number: numeric value
- Percent completion: numeric value
- Rekey state. Displays one of the following parameters:
 Rekey Setup
 LUN Prep
 Key Update
- Operation in progress. Displays one of the following parameters:
 Read Phase
 Write Phase
 HA Sync Phase
 LUN Cleanup
- VI: virtual initiator port WWN and node WWN
- VI PID: virtual initiator PID