Reference Guide

308 Fabric OS Command Reference
53-1002921-02
fcoeLoginGroup
2
fcoeLoginGroup
Creates and manages FCoE login group configuration.
SYNOPSIS fcoelogingroup --create lgname
-self | -switch swwn [-allowall | member[;member] ...]
fcoelogingroup --delete lgname
fcoelogingroup --add lgname member[;member] ...
fcoelogingroup --remove lgname wwn
fcoelogingroup --rename lgname newlgname
fcoelogingroup --help
DESCRIPTION Use this command to create or modify the FCoE login management configuration fabric-wide. You can
create or delete a login group, add Virtual N_Port (VN_Port) WWNs to a login group, or remove VN_Port
WWNs from a login group.
NOTES The configuration changes effected by this command are kept in a transaction buffer until you save the
new configuration with the fabric-wide fcoelogincfg --save command.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands.
--help
Displays the command usage.
--create
Creates a login group with the specified name and associates it with a specified
switch.
lgname
Specifies the name of the login group for this switch. The maximum length is a
64-byte string.
-self
Specifies the WWN of the current switch. When this operand is specified, the login
group is associated with the current switch.
-switch swwn
Specifies the WWN of the switch for which to create the login group.
-allowall
Allows all VN_Port devices to log in to the switch.
member
Identifies the WWN of the VN_Port. The WWN must be specified in hex format as
xx.xx.xx.xx.xx.xx.xx.xx. If more than one member is specified, members must be
separated by a semicolon. Only specified members are allowed to log in to the
switch.
--delete
Deletes a login group.