Reference Guide

Fabric OS Command Reference 919
53-1002921-02
portTestShow
2
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
-ports itemlist
Displays test results for the specified ports. This operand is optional; if omitted,
data for all ports are displayed. Refer to the itemList help page for further details.
EXAMPLES To display information from portTest:
switch:admin> porttestshow 1
Port 1 : PASS
PortType: OTHER PortState: NO TEST
PortInternalState: INIT PortTypeToTest: NO_TEST
Pattern: 0x0 Seed: 0x0 UserDelay: 0
TotalIteration: 0 CurrentIteration: 0
TotalFail: 0 ConsecutiveFail: 0
StartTime: NONE
StopTime: NONE
Timeout: 0 ErrorCode: 0
SEE ALSO portLoopbackTest, portTest, spinFab, stopPortTest