Release Notes

Closed defects with code change in Fabric OS v7.2.0a
Fabric OS v7.2.0a Release Notes v1.0 Page 56 of 93
Defect ID:
DEFECT000468007
Technical Severity:
High
Summary:
Host discovery issues via Ex ports on ICL in multi chassis configuration
Symptom:
Host may not see all target LUNs in a topology using multi-chassis EX ports on ICL configuration
Workaround:
Portdisable enable switch ports for affected devices.
Probability:
Medium
Feature:
FC Services
Function:
Name Server
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468188
Technical Severity:
High
Summary:
observed MDD kept crashing when a DS was set persistently disabled
Symptom:
user may see MDD hit rolling crashing when the switch is configure VF mode and the DS switch is set
disable persistently with MAPS enabled.
Probability:
Low
Feature:
Advanced Monitoring Services
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468413
Technical Severity:
High
Summary:
firmwaredownload -s on standby CP produces protocol failure in circuit setup messages on the console
Symptom:
Firmware download on the standby CP takes a long time to reach Y/N prompt and several "poll:
protocol failure in circuit setup" console messages resulted.
Workaround:
Use firmwaredownload without the -s option.
Probability:
Low
Feature:
Striker/Spike Platform Services
Function:
VEX
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468455
Technical Severity:
High
Summary:
QoS allowed ASIC buffer pool to become over allocated
Symptom:
Portbuffershow indicated a negative value in the remaining buffers after QoS was enabled on an
extended distance link
Probability:
Medium
Feature:
8G ASIC Driver
Function:
ASIC Driver
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468777
Technical Severity:
Medium
Summary:
portcfgpersistentdisable -r does not persist the reason on reboot of a 7800
Symptom:
port reason does not persist across a reboot on a 7800 switch when portcfgpersistentdisable -r is
configured
Probability:
Medium
Feature:
8G Platform Services
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000468795
Technical Severity:
High
Summary:
FCIP FICON XRC Emulation Abort after Selective Reset Errors
Symptom:
If FICON XRC Emulation receives a Selective Reset for a device that is currently in Stacked Status
State, the Selective Reset is incorrectly responded to by emulation processing leading to an abort
sequence from the channel for the Selective Reset Exchange.
Probability:
Low
Feature:
FCIP
Function:
Emulation
Reported In Release:
FOS7.0.0
Service Request ID:
1205859