Reference Guide

316 Fabric OS Message Reference
53-1002929-01
FABR-1015
5
FABR-1015
Message FICON Insistent DID max retry exceeded: All E_Ports will be disabled. Switch is
isolated.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the application exceeded request domain ID (RDI) requests for the insistent domain ID. All
E_Ports are disabled; isolating the specified switch from the fabric.
Recommended
Action
Verify that the insistent domain ID is unique in the fabric and then re-enable the E_Ports. Run the
fabricShow command to view the domain IDs across the fabric and the configure command to change
the insistent domain ID mode. Refer to the Fabric OS Command Reference for more information on
these commands.
FABR-1016
Message ficonMode is enabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command.
Recommended
Action
No action is required.
FABR-1017
Message ficonMode is disabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command.
Recommended
Action
No action is required.