Reference Guide

544 Fabric OS Message Reference
53-1002929-01
FW-1529
5
FW-1529
Message <Port Name> <Label>, has crossed lower threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of link resets that the port experiences has changed and crossed the lower
threshold boundary to a value within the acceptable range. Link resets occur due to link timeout errors
that indicate no frame activity at all. Both physical and hardware problems can cause link resets to
increase.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
FW-1531
Message <Port Name> <Label>, has crossed lower threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of C3 transmit timeout frames has crossed the lower threshold boundary and is
in between the low and high thresholds.
Recommended
Action
Check the target device; it could be slow.
FW-1533
Message <Port Name> <Label> has crossed lower threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the trunk utilization crossed the lower threshold boundary to in between the low and high
thresholds.
Recommended
Action
No action is required.