Deployment Guide

Fabric OS Command Reference 1053

53-1003131-01

slotPowerOff

Removes power from a slot.

SYNOPSIS slotpoweroff slot [-force]

slotpoweroff --help

DESCRIPTION Use this command to turn off the power to a blade unit. The slot must have a valid blade unit present and

the blade unit must be of a type that can be powered off.

Beginning with Fabric OS v7.3.0, this command is supported on Condor2 or Condor3 core blades also.

There is no frame loss when there are no ICLs connected.

This command, when executed on a core blade, displays a warning message and prompts for

confirmation as powering off the last core blade will disable the chassis.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS This command has the following operand:

slot [-force]

Specify the slot number of the blade to be powered down. This operand is

required.

On core blades, the command prompts for confirmation unless you use the -force

option.

--help

Displays command usage.

EXAMPLES To power off blade unit 3:

switch:admin> slotpoweroff 3

Slot 3 is being powered off

SEE ALSO powerOffListSet, powerOffListShow, slotPowerOn, slotShow