Deployment Guide

Fabric OS Command Reference 1075
53-1003131-01
snmpTraps
2
Note: The Zone Mib parameters are for restricted usage only.
To block a single port from receiving traps:
switch:admin> snmpTraps --block 17
To unblock a previously blocked port:
switch:admin> snmpTraps --unblock 17
To configure the switch so that only two ports receive the port traps, you block all traps and then unblock
the ports you want to receive the traps:
switch:admin> snmpTraps --block ALL
switch:admin> snmpTraps --unblock 17
switch:admin> snmpTraps --unblock 18
To display the blocked port status:
switch:admin> snmpTraps --show port
Port 0 1 2 3 4 5 6 7 8 9
-------------------------------------------------------------------
Blocked | | | | | | | | | |
Port 10 11 12 13 14 15 16 17 18 19
-------------------------------------------------------------------
Blocked | | | | | | | Y | Y | |
Port 20 21 22 23 24 25 26 27 28 29
-------------------------------------------------------------------
Blocked | | | | | | | | | |
Port 30 31 32 33 34 35 36 37 38 39
-------------------------------------------------------------------
Blocked | | | | | | | | | |
SEE ALSO snmpConfig