Deployment Guide

104 Fabric OS Command Reference

53-1003131-01

cfgDelete

Deletes a zone configuration.

SYNOPSIS cfgdelete "cfgName"

DESCRIPTION Use this command to delete a zone configuration.

This command changes the Defined Configuration (see cfgShow). For the change to become effective,

enable the configuration with the cfgEnable command. For the change to be preserved across switch

reboots, save the configuration to nonvolatile memory with the cfgSave command.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

OPERANDS The following operand is required:

"cfgName"

Specify a name for the zone configuration to be deleted. The name must be

enclosed in double quotation marks.

EXAMPLES To delete a zone configuration:

switch:admin> cfgdelete "USA_cfg"

SEE ALSO cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow