Deployment Guide

Fabric OS Command Reference 291
53-1003131-01
fanDisable
2
fanDisable
Disables a fan unit.
SYNOPSIS fandisable unit
DESCRIPTION Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTES This command is not available on nonbladed systems except for the Brocade 5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
unit
Specifies the number of the fan unit to disable.
EXAMPLES To disable a fan unit:
switch:admin> fandisable 1
Fan unit 1 has been disabled
SEE ALSO fanEnable, fanShow