Deployment Guide

Fabric OS Command Reference 385
53-1003131-01
ficonShow
2
Time Stamp
Displays the timestamp, expressed in date format.
Type
Same as Port Type.
Type Number
Displays the type number of the self-describing node. It also describes the
machine type.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
database
Specify the database to display. This operand is required. Valid values include the
following
RNID
Device node identification.
LIRR
Devices registered to receive link incident reports. Entries can have the following
flags:
-C*
A user-configured LIRR entry defined as current (set with the ficonCfg
command).
-C
A LIRR entry defined by the management server demon as current based on
order.
-S
A LIRR entry defined by the management server demon as secondary.
SwitchRNID
Switch node identification.
RLIR
Link incident reports.
ILIR
Implicit link incident reports.
fabric
Displays FICON database information for the entire fabric. This operand is
optional; if omitted, only local members of the named database are displayed.
table
Displays RNID data in table format.
port
Displays RNID data for the specified port.
port_index
Specifies the port index number in decimal or the area field (middle byte) of the
Fibre Channel Address (PID) in hexadecimal format.