Deployment Guide

Default Port Health monitoring thresholds for Target F_Ports (Continued)TABLE 30
Monitoring statistic
MAPS Target F_Port high/low thresholds and actions per policy
Aggressive Moderate Conservative Actions
Link Reset (LR) 0/2 3/5 6/10 Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
State Change
(STATE_CHG)
0/2 3/7 8/15 Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
Protocol Errors (PE) 0/2 3/4 5/6 Low threshold: EMAIL, SNMP, RASLOG
High threshold: EMAIL, SNMP, FENCE,
DECOM
Loss of signal
(LOSS_SIGNAL)
0 3 5 EMAIL, SNMP, RASLOG
Link Failure (LF) 0 3 5 EMAIL, SNMP, RASLOG
Sync Loss
(LOSS_SYNC)
0 3 5 EMAIL, SNMP, RASLOG
RXP percentage 60 75 90 EMAIL, SNMP, RASLOG
TXP percentage 60 75 90 EMAIL, SNMP, RASLOG
Utilization percentage 60 75 90 EMAIL, SNMP, RASLOG
If an F_Port cannot be identified as either a host or a target, the thresholds for it are the same as those
for Host F_Ports.
Non-F_Port default Port Health monitoring thresholds
The following table lists the default Port Health monitoring thresholds for non-F_Ports.
Default Port Health monitoring thresholds for non-F_Ports TABLE 31
Monitoring statistic
MAPS non-F_Port high/low thresholds and actions per policy
Aggressive Moderate Conservative Actions
C3 Time out
(C3TX_TO)
N/A N/A N/A N/A
CRC Errors (CRC) 0/2 10/20 21/40 Low threshold: EMAIL, SNMP,
RASLOG
High threshold: EMAIL, SNMP,
FENCE, DECOM
MAPS Threshold Values
106 Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01