Deployment Guide

Default SFP monitoring thresholds for QSFPs and all other SFPs (Continued)TABLE 35
Monitoring statistic
MAPS thresholds and actions (all
policies)
ActionsALL_QSFP ALL_OTHER_SFP
Receive Power (RXP)
(μW)
2180 5000 RASLOG, SNMP, EMAIL
Transmit Power (TXP)
(μW)
- 5000 RASLOG, SNMP, EMAIL
Voltage (VOLTAGE) (mV) 2940 to 3600 2960 to 3630 RASLOG, SNMP, EMAIL
Temperature (TEMP) (°C) -5 to 85 -13 to 85 RASLOG, SNMP, EMAIL
Fabric Performance Impact thresholds
This is the default FPI monitoring threshold used by the Monitoring and Alerting Policy Suite (MAPS).
The following table lists the default threshold values for Fabric Performance Impact monitoring. They
are binary, in that the threshold value is either present or it is not.
Default Fabric Performance Impact monitoring thresholdsTABLE 36
Monitoring statistic Value (Y/N) Actions
DEV_LATENCY_IMPACT IO_FRAME_LOSS
IO_PERF_IMPACT
RASLOG, SNMP, EMAIL
Switch Status Policy thresholds
The following tables lists the default Switch Status Policy monitoring thresholds used by MAPS. All
threshold conditions are absolute and actions are triggered when the reported value is greater than or
equal to the threshold value. For thresholds with both an upper value and a lower value, an action is
triggered when the reported value exceeds the upper threshold value or drops below the lower
threshold value.
Aggressive policy Switch Status Policy thresholds
The following table lists the default Switch Status Policy thresholds for the default aggressive MAPS
policy.
Fabric Performance Impact thresholds
110 Monitoring and Alerting Policy Suite Administrator's Guide
53-1003147-01