Command Reference Guide

Fabric OS Command Reference 621

53-1002746-01

portAlpaShow

Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port.

SYNOPSIS portalpashow [slot/]port

DESCRIPTION Use this command to display the AL_PAs of devices connected to a port, and whether these devices are

public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this command

prints an error.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS This command has the following operands:

slot

For bladed systems only, specify the slot number of the port to display, followed by

a slash (/).

port

Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports.

EXAMPLES To display the AL_PAs of a port:

switch:user> portalpashow 4/14

AL_PA type AL_PA type AL_PA type

0xe2 public 0xe4 public