Deployment Guide

7. Enter the number of the port with which you want to swap the current port.
If the port is on a blade, you must also provide the slot number.
NOTE
Port swapping on an FC8-48, FC8-48E, FC8-64, and FC16-48 is supported only on ports 0 through
15.
8. Click OK.
Determining if a port index was swapped with another switch port
To determine whether a port was swapped, perform the following steps.
1. Select a port in the Switch View to open the Port Admin tab.
2. Select the FC Ports tab.
3. Select View > Advanced.
4. From the tree on the left, select the port you want to swap.
5. Click the General tab.
NOTE
The Port Index attribute on the General tab indicates whether a port was swapped. For ports that
were swapped, the attribute name displays as Port Index value (Swapped), as shown in the following
figure. The value indicates with which port index the port was swapped.
Determining if a port index was swapped with another switch port
Web Tools Administrator's Guide 111
53-1003169-01