Developers Guide

192 Fabric OS Message Reference
53-1003140-01
BL-1047
5
BL-1047
Message Buffer optimized mode is turned <buffer optimized mode> for slot <slot number>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the buffer optimized mode is changed for the specified slot.
Recommended
Action
No action is required.
BL-1048
Message FCoE Blade in slot <Slot> failed because the Interop mode is enabled on the
switch.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the interop mode is turned on in the default switch while powering on the FCoE blade.
Recommended
Action
Disable the interop mode using the interopmode command; then execute the slotPowerOff and
slotPowerOn commands on the FCoE blade.
BL-1049
Message Serdestunemode: <serdestuning mode>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the SerDes tuning mode is changed for the slot.
Recommended
Action
No action is required.