Developers Guide

494 Fabric OS Message Reference
53-1003140-01
FW-1118
5
Recommended
Action
Verify that the cable is properly connected at both ends. Verify that the small form-factor pluggables
(SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and
might not require troubleshooting.
FW-1118
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of fabric reconfigurations has fallen below the low boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1119
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
Verify that all inter-switch link (ISL) cables are properly connected at both ends. Verify that the small
form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be a
transient error and might not require troubleshooting.