Developers Guide

692 Fabric OS Message Reference
53-1003140-01
NSM-1003
5
NSM-1003
Message Interface <InterfaceName> is link down.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified interface has gone offline because the link is down.
Recommended
Action
Check whether the connectivity between the peer ports is proper, and the remote link is up using the
show interface command.
NSM-1004
Message Interface <InterfaceName> is created.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified logical interface has been created.
Recommended
Action
No action is required.
NSM-1005
Message The FCoE VLAN: <VlanName> is in use. Therefore, cannot disable the FCoE VLAN.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified Fibre Channel over Ethernet (FCoE) VLAN is used in the FCoE daemon
(fcoed) and therefore cannot be disabled.
Recommended
Action
Remove all the FCoE sessions from the FCoE VLAN member ports and then disable the FCoE VLAN.
NSM-1006
Message FCoE on VLAN: <VlanName> has been disabled successfully.
Message Type LOG
Severity INFO
Probable Cause Indicates that FCoE has been disabled on the specified VLAN.