Developers Guide

790 Fabric OS Message Reference
53-1003140-01
SEC-1170
5
SEC-1170
Message This command must be executed on the Primary FCS switch, the first reachable
switch in the FCS list.
Message Type LOG
Severity INFO
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
SEC-1171
Message Disabled secure mode due to invalid security object.
Message Type LOG
Severity ERROR
Probable Cause Indicates the switch is segmented, and secure mode is disabled on the switch because there was no
license present or no public key infrastructure (PKI) objects.
Recommended
Action
Run the secCertUtil show -fcapall command to determine whether all PKI objects exist. If they do not
exist, run the secCertUtil command to create them for the switch.
Run the licenseAdd command to install the required license key. Contact your switch supplier to obtain a
license if you do not have one.
SEC-1172
Message Failed to identify role.
Message Type LOG
Severity ERROR
Probable Cause Indicates the switch is unable to determine its role (primary FCS or backup FCS) in the secure fabric.
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary FCS and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.