Developers Guide

Fabric OS Message Reference 977

53-1003140-01

ZONE-1066

Message Zoning operation failed to complete on the local switch - code <Error Code>.

Message Type LOG

Severity ERROR

Probable Cause Indicates an IPC error occurred between Name Server and Zone Server.

Recommended

Action

The switch is in an inconsistent state and can be corrected only by a reboot or power cycle.

Upon reboot, if switch is unable to join the fabric due to a zone conflict, issue cfgClear command.

If there is an enabled-configuration, commit cfgClear operation by issuing cfgDisable.

If there is no enabled-configuration, commit cfgClear operation by issuing cfgSave.

ZONE-3001

Message Event: <Event Name>, Status: success, Info: <Zone object type> \"<Zone object

member list>\" added to <Zone object set type> \"<Zone object set name>\".

Message Type AUDIT

Class ZONE

Severity INFO

Probable Cause Indicates that a new zone object member or members have been added to the specified zone object set.

The zone object type variable can be an alias, zone member, zone, or zone configuration. The string "..."

appears at the end of the zone object member list variable if the list was truncated in the message.

Recommended

Action

Verify that the event was planned. If the event was planned, no action is required. If the event was not

planned, take appropriate action as defined by your enterprise security policy.

ZONE-3002

Message Event: <Event Name>, Status: success, Info: <Zone object set type> \"<Zone object

set name>\" created with <Zone object type> \"<Zone object member list>\".

Message Type AUDIT

Class ZONE

Severity INFO

Probable Cause Indicates that a new zone object set was created and the specified zone object member or members

were added to the zone object set.

The zone object type variable can be an alias, zone member, zone, or zone configuration. The string "..."

appears at the end of the zone object member list variable if the list was truncated in the message.