Messages Reference Guide

Fabric OS Message Reference 127

53-1002749-01

AG-1018

Message Host port should not be connected to port <port number> which is configured as

N_Port.

Message Type LOG

Severity ERROR

Probable Cause Indicates that an initiator or target port is erroneously connected to a port configured for N_Port

operation.

Recommended

Action

Execute the switchShow command to display the status of all ports in the system. Execute the

portCfgShow command to display the list of ports currently configured as N_Ports. Make sure the host

is connected to an F_port.

AG-1019

Message Unable to failover N_Port <port number>. No other N_Port in port group:<pgid> is

online.

Message Type LOG

Severity WARNING

Probable Cause Indicates that failover across port groups is not supported.

Recommended

Action

Check whether an alternate N_Port is configured in the specified port group using the ag --pgshow

command.

AG-1020

Message F_Ports to N_Ports route/mapping has been changed.

Message Type LOG

Severity INFO

Probable Cause Indicates that F_Port-to-N_Port mapping has been changed because the switch has come online or

some new N_Ports or F_Ports have come online.

Recommended

Action

Execute the ag --mapshow command to display the updated F_Port-to-N_Port mapping.