Messages Reference Guide

216 Fabric OS Message Reference
53-1002749-01
CNM-1001
5
CNM Messages
CNM-1001
Message Failed to allocate memory: (<function name>).
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified function has failed to allocate memory.
Recommended
Action
Check memory usage on the switch using the memShow command.
Restart or power cycle the switch.
CNM-1002
Message Failed to initialize <module> rc = <error>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the initialization of a module within the Cluster Node Manager (CNM) has failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command.
CNM-1003
Message Crypto device cfg between local switch (<local domain id>) and peer (<peer domain
id>) out of sync. New encryption session not allowed.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the encryption engine nodes in the cluster encryption group have different configurations.
Recommended
Action
Synchronize the configuration in the cluster group using the cryptocfg command.