Messages Reference Guide

262 Fabric OS Message Reference
53-1002749-01
CVLM-1014
5
CVLM-1014
Message RD zone getting deleted for which there is no Host/Target
(<HostPortWWN>/<TargetPortWWN>) L2 zone exists in effective configuration.
Message Type LOG
Severity ERROR
Probable Cause Indicates deletion of Frame Redirect (RD) zone and there is no corresponding Layer 2 zone present, but
IT pair is in crypto configuration.
Recommended
Action
Disable the target access to the host, recreate the Layer 2 zone for host and target, and run the
cryptocfg --commit command again to recreate the RD zone.
CVLM-1015
Message Unable to read basewwn from blade in slot <Slot>.
Message Type LOG
Severity ERROR
Probable Cause Indicates a failure to read the base WWN programmed on SEEPROM from this blade. Probably,
SEEPROM is not programmed properly.
Recommended
Action
WWN allocation is not possible from this blade, but the blade can be used for crypto operations.
SEEPROM needs to be reprogrammed on this blade.
CVLM-1016
Message Invalid base WWN (<BaseWWN>) and/or page index (<Page>) received from the blade in
slot <Slot>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that invalid base WWN and index are read from SEEPROM on this blade. Probably,
SEEPROM is not programmed properly.
Recommended
Action
WWN allocation is not possible from this blade, but the blade can be used for crypto operations.
SEEPROM needs to be reprogrammed on this blade.