Messages Reference Guide

314 Fabric OS Message Reference

53-1002749-01

FABR-1035

Message Slave area <Area that does not match Master port's area> does not match Master

port <Master port >. Persistently disabling port <Port that is being disabled>.

Message Type LOG

Severity INFO

Probable Cause Indicates the Slave port's Trunk Area differs from that of the Master port.

Recommended

Action

Move the cable to a port to match with the same Master Trunk Area, or disable Trunk Area. You must

manually enable the port or the port remains disabled forever.

Refer to the Fabric OS Administrator's Guide for more information.

FABR-1036

Message F_Port trunks are only allowed on Trunk Area enabled port. Persistently disabling

port <Port that is being disabled>.

Message Type LOG

Severity INFO

Probable Cause Indicates the specified port is being disabled because when the port on a switch is Trunk Area-enabled, it

does not allow other devices like Access Gateway (AG) or HBA that are not Trunk Area-enabled.

Recommended

Action

Move the cable to a port that does not have Trunk Area enabled.

FABR-1037

Message Port configuration incompatible with Trunk Area enabled port. Persistently

disabling port <Port that is being disabled>.

Message Type LOG

Severity INFO

Probable Cause Indicates the specified port is being disabled because when the port attempts to go online, the switch

finds the Trunk Area enabled is incompatible with port configurations such as long distance, port mirror,

fast write, or EX_Port.

Recommended

Action

Check the port configurations to disable long distance, port mirror, fast write, or EX_Port.