Messages Reference Guide

Fabric OS Message Reference 325

53-1002749-01

FABS-1014

Message <Method name>[<Method tag number>]:Unknown FRU type 0x<FRU Object type>.

Message Type LOG

Severity ERROR

Probable Cause Indicates an unrecognized type of field-replaceable unit (FRU) has been discovered in the system.

This may be caused by an incorrect FRU header, inability to read the FRU header, or the FRU may not

be supported by this platform or Fabric OS version.

Recommended

Action

Verify that the FRU is valid for use in this system and this version of Fabric OS.

Reseat the FRU.

If this is a valid FRU and reseating does not solve the problem, replace the FRU

FABS-1015

Message <Method name>[<Method tag number>]:Request to enable FRU type 0x<FRU Object type>,

unit <Unit number> failed. err code <Error code>.

Message Type LOG

Severity ERROR

Probable Cause Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem.

Recommended

Action

Remove and reinsert the FRU.

Reboot or power cycle the CP or system.

If the message persists, run the firmwareDownload command to update the firmware.