Messages Reference Guide

408 Fabric OS Message Reference

53-1002749-01

FICN-1103

Message DevTeraIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation

state> status=0x<the exceptional status value>.

Message Type LOG

Severity INFO

Probable Cause Indicates that the status (0x0D or 0x05) indicating the device is going down was received from the device

or error status (including Unit Check 0x02) is received from an active emulation device.

Recommended

Action

The device doing down is a normal event during pipelining and not the unit check. If there are associated

I/O error messages with this event, contact your vendor's customer support for assistance.

FICN-1104

Message DevTeraEgr:Device Ready on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.

Message Type LOG

Severity INFO

Probable Cause Indicates the Teradata device has been initialized and is ready for emulation operations.

Recommended

Action

No action is required.

FICN-1105

Message DevTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands

received from the channel for this device> lastStatus=0x<Last 4 status values

presented to the channel for this device> treating as system reset event.

Message Type LOG

Severity WARNING

Probable Cause Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a

path established to the Control Unit.

Recommended

Action

This is normally an unexpected event; contact your vendor's customer support for assistance.