MIB Reference Guide

ManualsBrandsDell ManualsserversDell Brocade 6520

53-1002750-01

14 December 2012

Fabric OS

MIB Reference

Supporting Fabric OS v7.1.0

Summary of content (370 pages)

PAGE 1
53-1002750-01 14 December 2012 Fabric OS MIB Reference Supporting Fabric OS v7.1.
PAGE 2
Copyright © 2000-2012 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, Brocade Assurance, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, ServerIron, TurboIron, VCS, and VDX are registered trademarks, and AnyIO, Brocade One, CloudPlex, Effortless Networking, ICX, NET Health, OpenScript, and The Effortless Network are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries.
PAGE 3
Document Title Publication Number Summary of Changes Publication Date Brocade Fabric OS MIB Reference Manual 53-0000521-09 Updated to support the Brocade 48000 and 200E. April 2005 Brocade Fabric OS MIB Reference Manual 53-1000045-01 Updated to support the Brocade 4900, 7500, and FR4-18i blade. January 2006 Brocade Fabric OS MIB Reference 53-1000241-01 Changed name, updated to support Fabric OS v5.2.x.
PAGE 4
Document Title Publication Number Summary of Changes Publication Date Fabric OS MIB Reference 53-1002151-01 Updated to support Brocade 6510, Brocade DCX 8510-8 Backbone, and Brocade DCX 8510-4 Backbone. Added FibreAlliance extension MIB, SNMPv2 MIB, ipAddressTable, MIBs for swConnUnitPortStatExtention Table, and switch traps. April 2011 Fabric OS MIB Reference 53-1002750-01 Updated to support Brocade 6505, Brocade 6520, and Brocade VA-40FC.
PAGE 5
Contents About This Document How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xiv What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
Chapter 2 MIB-II (RFC1213-MIB) MIB II overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 MIB-II object hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Textual conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Objects and types imported . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 System group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
fcFeCapabilities group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 FCFABRIC-ELEMENT-MIB (experimental branch) . . . . . . . . . . . . . . . 87 FCFABRIC-ELEMENT-MIB organization . . . . . . . . . . . . . . . . . . . . 88 Definitions for FCFABRIC-ELEMENT-MIB . . . . . . . . . . . . . . . . . . 91 fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 fcFeOp group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 8
Toptalker group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CPU or memory usage group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 Switch connectivity unit port statistics extension table . . . . . . . . .175 Chapter 7 High-Availability MIB Objects HA-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 High-Availability group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
Switch connectivity unit port table. . . . . . . . . . . . . . . . . . . . . . . . . . 241 Chapter 11 FCIP MIB Objects FCIP MIB overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 FCIP MIB system organization of MIB objects . . . . . . . . . . . . .243 FCIP entity instance table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245 FCIP link table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
LLDP MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284 LLDP configuration group . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284 LLDP statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286 LLDP local system data group. . . . . . . . . . . . . . . . . . . . . . . . . .287 LLDP remote systems data group. . . . . . . . . . . . . . . . . . . . . . .289 LLDP-EXT-DOT1-MIB . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
Appendix A MIB Object Groupings Switch variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339 Sensor variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339 Port variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339 Variables for state and status . . . . . . . . . . . . . . . . . . . . . . . . . .339 Variables for statistics and measurement . . . . . . . . . . . . . . . .
PAGE 12
xii Fabric OS MIB Reference 53-1002750-01
PAGE 13
About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii • Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv • What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi • Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii • Notice to the reader . . . . . . . . . . . . .
PAGE 14
Supported hardware and software • Chapter 15, “IEEE 802.1x PAE MIB Objects,” provides information on IEEE 802.1x PAE MIB object types. • Chapter 16, “LLDP MIB Objects,” provides information on LLDP MIB object types. • Chapter 17, “IEEE 802.3 LAG MIB Objects,” provides information on IEEE 802.3 LAG MIB object types. • • • • Chapter 18, “Bridge-MIB Objects,” provides information on Bridge-MIB object types. Chapter 19, “BD MIB Objects,” provides information on BD MIB object types.
PAGE 15
Supported hardware and software • Brocade 8000 FCoE Switch • Brocade Encryption Switch • Brocade DCX Backbone and Brocade DCX-4S Backbone - FA4-18 Fibre Channel application blade - FCOE10-24 DCX Blade - FS8-18 Encryption Blade - FC8-16 port blade - FC8-32 port blade - FC8-48 port blade - FC8-64 port blade - FX8-24 DCX Extension Blade • Brocade 48000 director - FA4-18 Fibre Channel application blade - FC4-16 port blade - FC4-16IP blade - FC4-32 port blade - FC4-48 port blade - FC8-16 port blade - FC8-32 por
PAGE 16
What’s new in this document • • • • • FA4-18 FC4-16IP FC4-16 FC4-32 FC4-48 What’s new in this document The following changes have been made since this document was last released: • Information that was added: - Support for Brocade 6505, Brocade 6520, and Brocade VA-40FC - The following traps included:  - swDeviceStatusTrap The following MIB objects included: swConnUnitPortTable swConnUnitPortEntry  swConnUnitPortCapableSpeeds  swConnUnitPortSpeedMode  swDeviceStatus  swConnUnitPCSErrorCounter I
PAGE 17
Document conventions Document conventions This section describes text formatting conventions and important notices formats.
PAGE 18
Notice to the reader Key terms For definitions specific to Brocade and Fibre Channel, see the technical glossaries on MyBrocade. See “Brocade resources” on page xviii for instructions on accessing MyBrocade. For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary at: http://www.snia.org/education/dictionary Notice to the reader This document may contain references to the trademarks of the following corporations.
PAGE 19
Getting technical help For information about the Fibre Channel industry, visit the Fibre Channel Industry Association website: http://www.fibrechannel.org Getting technical help Contact your switch supplier for hardware, firmware, and software support, including product repairs and part ordering. To expedite your call, have the following information immediately available: 1.
PAGE 20
Document feedback Use the licenseIdShow command to display the WWN of the chassis. If you cannot use the licenseIdShow command because the switch is inoperable, you can get the WWN from the same place as the serial number, except for the Brocade DCX. For the Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at the top of the nonport side of the chassis.
PAGE 21
Chapter Understanding Brocade SNMP 1 In this chapter • Setting the SNMP security level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Understanding SNMP basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Loading Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 • Access Gateway and Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 22
1 Understanding SNMP basics TABLE 2 Security level options Security level Protocol Query behavior Traps No security [0] (noAuthnoPriv) SNMPv1 SNMPv3 Allowed. Allowed. Sent. Sent. Authentication only [1] (authNoPriv) SNMPv1 SNMPv3 Allowed. All SNMPv3 users allowed except noAuthNoPriv users. Sent. Sent for all SNMPv3 users except noAuthNoPriv users. Authentication and Privacy [2] (authPriv) SNMPv1 SNMPv3 Not allowed. Only SNMPv3 users with authPriv privilege are allowed. Not Sent.
PAGE 23
Understanding SNMP basics 1 The agent can receive queries from one or more management stations and can send traps to up to six management stations. Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy.
PAGE 24
1 Understanding SNMP basics Since different vendors vary the information in their private enterprise MIBs, it is necessary to verify their information. The Fibre Channel MIB standards dictate that certain information be included in all MIBs: it is the vendors’ responsibility to follow the standards. The standards are as follows: • FibreAlliance (FA) MIB: Brocade supports v4.4. and later releases. • Fabric Element (FE) MIB: accepted by the Internet Engineering Task Force (IETF).
PAGE 25
Understanding SNMP basics 1 You can also use these additional MIBs and their associated traps: HA-MIB; FICON-MIB; and SWEXTTRAP. In Fabric OS v6.4.0, you can use the snmpConfig command to enable or disable all the MIBs. An event trap (swEventTrap, connUnitEventTrap, or swFabricWatchTrap) is basically an error message (errShow output) that is SNMP-formatted and delivered. FA traps Consider enabling the FA traps if you want to use SNMP to monitor multiple connectivity units, including Brocade switches.
PAGE 26
1 Understanding SNMP basics SW traps There are fourteen specific traps defined in Brocade SW-TRAP. 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log. The desired severity level is introduced to filter a swEvent trap based on the severity level. 5. swFabricWatchTrap This trap is generated when any Fabric Watch threshold is reached.
PAGE 27
Loading Brocade MIBs 1 The Brocade trap (SW-TRAP) can be configured to send traps using the snmpConfig command. For more information on this command, refer to Table 6 or the Fabric OS Command Reference. Object instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance of that object. The following is an OID number and an instance number: 1.3.6.1.4.1.1588.2.
PAGE 28
1 Loading Brocade MIBs • • • • • • • • • • • • • • • • • • • • • • • • • • • • SNMP-FRAMEWORK-MIB IF-MIB IANAifType-MIB INET-ADDRESS-MIB RFC1213-MIB SNMPv2-MIB ENTITY-MIB RMON-MIB FC-MGMT-MIB FCIP-MGMT-MIB ISCSI-MIB FIBRE-CHANNEL-FE-MIB SNMPv2-PARTY-MIB SNMPv2-SMI-MIB SNMP-VIEW-BASED-ACM-MIB SNMP-USER-BASED-SM-MIB SNMP-TARGET-MIB IEEE 802.1x PAE MIB IEEE 802.
PAGE 29
Loading Brocade MIBs TABLE 3 1 Fabric OS-supported SNMP versions (Continued) Firmware SNMPv1 SNMPv2 SNMPv3 Fabric OS v6.1.2_CEE Yes No Yes Fabric OS v6.3.0 Yes No Yes Fabric OS v6.4.0 Yes No Yes Fabric OS v6.4.1_fcoe Yes No Yes Fabric OS v7.0.0 Yes No Yes Fabric OS v7.0.1 Yes No Yes Fabric OS v7.1.0 Yes No Yes 1. SNMPv2 is supported in Fabric OS v5.0.4 and later, but SNMPv2 traps are not supported. 2. Fabric OS v5.
PAGE 30
1 Loading Brocade MIBs Select one FICON_v5_0.mib FICON.MIB BRCD.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x, 6.x RFC1155-SMI FOS 6.0 FICON.mib FOS 7.0 Brocade_RE.MIB FOS 6.4, 7.0 Brocade_TC.mib FOS 6.4, 7.0 BD.mib FOS 6.4, 7.0 Select one RFC2571 SNMP-FRAMEWORKMIB FA_v2_2.mib FCMGMT-MIB FOS 2.6.x FE_RFC2837.mib FIBRE-CHANNEL-FE-MIB FOS 3.1.x, 4.x, 5.x, 6.x, 7.0 FA.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x, 6.x SW_v5_5.mib FOS 2.6.x, 3.x, 4.x, 5.x SW_v5_7.mib FOS 6.x SW.mib FOS 6.
PAGE 31
Loading Brocade MIBs 1 NOTE FA.mib obsoletes the use of the connUnitPortStatFabricTable and now uses the connUnitPortStatTable for port statistics. All versions of Fabric OS support SNMPv1. Fabric OS v5.0.1 supports the SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS v5.3.0 supports the FCIP MIB and ifXtable. SNMP CLI usage The examples for configuring SNMPv3 users/traps are listed in the following section. Configuring SNMPv3 user/traps 1.
PAGE 32
1 Loading Brocade MIBs Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser2] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser3] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..
PAGE 33
Loading Brocade MIBs 1 Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00:00:00 SNMPv3 Trap configuration: Trap Entry 1: 10.35.52.33 Trap Port: 162 Trap User: snmpadmin1 Trap recipient Severity level: 4 Trap Entry 2: 10.35.52.
PAGE 34
1 Loading Brocade MIBs Trap recipient Severity level : (0..5) [0] 1 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] fe80::224:1dff:fef6:3f98 UserIndex: (1..6) [2] Trap recipient Severity level : (0..5) [0] 2 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] HCL0389U.corp.brocade.com UserIndex: (1..6) [3] Trap recipient Severity level : (0..5) [0] 5 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.
PAGE 35
Loading Brocade MIBs 1 switch:root> snmpTraps --show # |Mib Name |Supported Traps ---|----------------|-------------------------------001|SW-MIB |sw-track-changes-trap | |sw-fabric-watch-trap | |sw-fc-port-scn | |ip-v6-change-trap | |sw-pmgr-event-trap | |sw-event-trap | |sw-fabric-reconfig-trap | |sw-fabric-reconfig-trap | |sw-state-trap | |sw-move-port-trap | |sw-brcd-genric-trap 002|FICON-MIB |link-rnid-device-registration | |link-rnid-device-deregistration | |link-lirr-listerner-added | |link-lirr-lis
PAGE 36
1 Loading Brocade MIBs switch:admin> snmptraps -unblock -port 1/10 To block port traps on slot 1 and port 10: Switch:admin> snmptraps -block -port 1/10 Example of accessControl configuration: switch:admin> snmpconfig --set accessControl SNMP access list configuration: Access host subnet area in dot notation: [0.0.0.0] 192.168.0.0 Read/Write? (true, t, false, f): [true] Access host subnet area in dot notation: [0.0.0.0] 10.32.148.
PAGE 37
Loading Brocade MIBs 1 Operation succeeded switch:admin> snmpconfig --show mibCapability [...] SW-MIB: YES swFault: NO swSensorScn: NO swFCPortScn: NO swEventTrap: YES DesiredSeverity:None swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: NO swIPv6ChangeTrap: NO swPmgrEventTrap: NO swFabricReconfigTrap: NO swFabricSegmentTrap: NO swExtTrap: NO [...
PAGE 38
1 Loading Brocade MIBs swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: YES swIPv6ChangeTrap: YES swPmgrEventTrap: YES swFabricReconfigTrap: YES swFabricSegmentTrap: YES swExtTrap: YES FA-TRAP: YES connUnitStatusChange: YES connUnitDeletedTrap: YES connUnitEventTrap: YES connUnitSensorStatusChange: YES connUnitPortStatusChange: YES FICON-TRAP: YES linkRNIDDeviceRegistration: YES linkRNIDDeviceDeRegistration: YES linkLIRRListenerAdded: YES linkLIRRListenerRemoved: YES linkRLIRFailureIncident
PAGE 39
Access Gateway and Brocade MIBs 1 (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 = No Access): (2..
PAGE 40
1 Firmware upgrades and enabled traps TABLE 4 Access Gateway MIB support (Continued) MIB name Supported Description FE-MIB No Disabled in Access Gateway because the conventions are specific to fabric switches. CPQ-Rack MIB Limited Supported on embedded switches only. FCIP MIB No Disabled in Access Gateway because the conventions are specific to fabric switches. iSCSI MIB No Disabled in Access Gateway because the conventions are specific to fabric switches.
PAGE 41
Fabric OS commands for configuring SNMP TABLE 6 1 Detailed description of the commands Command Operands Arguments snmpConfig --show | --set | --default | --enable | --disable [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | seclevel] --show Displays the SNMP agent configuration data of the specified category. snmpv1 Selects SNMPv1-related configuration parameters.
PAGE 42
1 Fabric OS commands for configuring SNMP TABLE 6 Detailed description of the commands (Continued) Command Operands Arguments snmpConfig --set mibCapability [-mib_name [ -bitmask ]] --set mibCapability Configures MIBs interactively. When used without a MIB name, this command displays a menu with supported MIBs and associated traps, and for each MIB or trap, you are prompted to confirm or change the default by specifying yes or no.
PAGE 43
Support for Administrative Domains TABLE 6 1 Detailed description of the commands (Continued) Command Operands snmptraps --show [port] --show Displays all configured SNMP traps and MIBs supported in Fabric OS. This also shows the blocked ports trap status on all the ports. port Shows only those ports which have blocked traps. snmptraps --block | --unblock [-port | ALL] --block Blocks port traps on a port. NOTE: This command is not supported for linkDown and linkup traps.
PAGE 44
1 Customized traps Customized traps This is only applicable for OEM customers. FOS v7.0.0 and v7.0.1 releases supported addition of system OID in trap OID to customized trap OID on different platforms. For example, Fabric Watch customized trap OID is 1.3.6.1.4.1.1588.2.1.1.62.0.5 on DCX and 1.3.6.1.4.1.1588.2.1.1.71.0.5 on Brocade 5100. This feature is not supported from FOS 7.1.0 release.
PAGE 45
Chapter 2 MIB-II (RFC1213-MIB) In this chapter • MIB II overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • System group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Interfaces group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • AT group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 46
2 MIB II overview - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II overall hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.6 - sysServices 1.3.6.1.2.1.1.
PAGE 47
MIB II overview 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 - ifInNUcastPkts 1.3.
PAGE 48
2 MIB II overview - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.14 - ipReasmOKs 1.
PAGE 49
MIB II overview - FIGURE 10 2 ipAddressType 1.3.6.1.2.1.4.34.1.4 ipAddressPrefix 1.3.6.1.2.1.4.34.1.5 ipAddressOrigin 1.3.6.1.2.1.4.34.1.6 ipAddressStatus 1.3.6.1.2.1.4.34.1.7 ipAddressCreated 1.3.6.1.2.1.4.34.1.8 ipAddressLastChanged 1.3.6.1.2.1.4.34.1.9 ipAddressRowStatus 1.3.6.1.2.1.4.34.1.10 ipAddressStorageType 1.3.6.1.2.1.4.34.1.11 IP hierarchy - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.
PAGE 50
2 MIB II overview - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
PAGE 51
MIB II overview 2 - egp - (1.3.6.1.2.1.8) egpInMsgs egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs FIGURE 14 EGP hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.1 - snmpOutPkts 1.3.6.1.
PAGE 52
2 System group - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 - ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 - ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 - ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 - ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 - ifHCOutOctets 1.3.6.1.2.1.31.1.
PAGE 53
System group 2 TABLE 8 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description sysDescr 1.3.6.1.2.1.1.1 Read only A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software. This must contain only printable ASCII characters. Set this value using the snmpconfig command. The default value is either Fibre Channel Switch or Access Gateway. sysObjectID 1.3.6.1.2.1.1.
PAGE 54
2 Interfaces group TABLE 8 Object and OID Access Description sysLocation 1.3.6.1.2.1.1.6 Read-write The physical location of this node (for example, telephone closet, 3rd floor). The minimum length of the string must be four. The default is End User Premise. Set this value using the snmpconfig command. sysServices 1.3.6.1.2.1.1.7 Read only A value that indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value 0.
PAGE 55
Interfaces group 2 TABLE 9 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description ifIndex 1.3.6.1.2.1.2.2.1.1 Read only A unique value for each interface. The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one re-initialization of the entity's network management system to the next re-initialization. For Network Interface, the number starts from 805306369 and increments with the interface count.
PAGE 56
2 Interfaces group TABLE 9 Object and OID Access Description ifSpeed 1.3.6.1.2.1.2.2.1.5 Read only An estimate (in bits per second) of the interface's current bandwidth. For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should contain the nominal bandwidth. For Fabric OS v4.x, 2 Gbps returns.
PAGE 57
Interfaces group 2 TABLE 9 Object and OID Access Description ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 Read only The number of subnetwork-unicast packets delivered to a higher-layer protocol. NOTE: This object is not supported. ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 Read only The number of nonunicast packets (for example, subnetwork-broadcast or subnetwork-multicast) delivered to a higher-layer protocol. NOTE: This object is not supported. ifInDiscards 1.3.6.1.2.1.2.2.1.
PAGE 58
2 AT group AT group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables. TABLE 10 Object and OID Access Description atTable 1.3.6.1.2.1.3.
PAGE 59
IP group 2 TABLE 11 Object and OID Access Description ipInHdrErrors 1.3.6.1.2.1.4.4 Read only The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on. ipInAddrErrors 1.3.6.1.2.1.4.
PAGE 60
2 IP group TABLE 11 Object and OID Access Description ipReasmFails 1.3.6.1.2.1.4.16 Read only The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, and so on). NOTE: This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. 40 ipFragOKs 1.3.6.1.2.1.4.
PAGE 61
IP group 2 TABLE 11 Object and OID Access Description ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 Read-write The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 Read-write An alternate routing metric for this route.
PAGE 62
2 IP group TABLE 11 Object and OID Access Description ipRouteMask 1.3.6.1.2.1.4.21.1.11 Read-write The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask 255.0.0.0 255.255.0.
PAGE 63
ICMP group 2 TABLE 11 Object and OID Access Description ipAddressTable 1.3.6.1.2.1.4.34 Not accessible This table contains IPv4 and IPv6 addressing information relevant to the entity's interfaces. ipAddressEntry 1.3.6.1.2.1.4.34.1 Not accessible An address mapping for a particular interface. ipAddressAddrType 1.3.6.1.2.1.4.34.1.1 Not accessible The address type of ipAddressAddr. ipAddressAddr 1.3.6.1.2.1.4.34.1.
PAGE 64
2 ICMP group TABLE 12 44 Object and OID Access Description icmpInMsgs 1.3.6.1.2.1.5.1 Read only The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors. icmpInErrors 1.3.6.1.2.1.5.2 Read only The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). icmpInDestUnreachs 1.3.6.1.2.1.5.
PAGE 65
TCP group 2 TABLE 12 Object and OID Access Description icmpOutRedirects 1.3.6.1.2.1.5.20 Read only The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects. icmpOutEchos 1.3.6.1.2.1.5.21 Read only The number of ICMP Echo (request) messages sent. icmpOutEchoReps 1.3.6.1.2.1.5.22 Read only The number of ICMP Echo Reply messages sent. icmpOutTimestamps 1.3.6.1.2.1.5.23 Read only The number of ICMP Timestamp (request) messages sent.
PAGE 66
2 TCP group TABLE 13 46 Object and OID Access Description tcpPassiveOpens 1.3.6.1.2.1.6.6 Read only The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. tcpAttemptFails 1.3.6.1.2.1.6.
PAGE 67
UDP group 2 TABLE 13 Object and OID Access Description tcpConnState 1.3.6.1.2.1.6.13.1.1 Read-write The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
PAGE 68
2 EGP group TABLE 14 Object and OID Access Description udpInDatagrams 1.3.6.1.2.1.7.1 Read only The total number of UDP datagrams delivered to UDP users. udpNoPorts 1.3.6.1.2.1.7.2 Read only The total number of received UDP datagrams for which there was no application at the destination port. udpInErrors 1.3.6.1.2.1.7.3 Read only The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. udpOutDatagrams 1.3.6.1.2.
PAGE 69
SNMP group 2 TABLE 15 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description snmpInPkts 1.3.6.1.2.1.11.1 Read only The total number of messages delivered to the SNMP entity from the transport service. snmpOutPkts 1.3.6.1.2.1.11.2 Read only The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service. snmpInBadVersions 1.3.6.1.2.1.11.
PAGE 70
2 SNMP group TABLE 15 50 Object and OID Access Description snmpOutTooBigs 1.3.6.1.2.1.11.20 Read only The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is too large. snmpOutNoSuchNames 1.3.6.1.2.1.11.21 Read only The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “noSuchName.” snmpOutBadValues 1.3.6.1.2.1.11.
PAGE 71
ifMIB group 2 NOTE snmpInBadTypes and snmpOutReadOnlys are not supported. ifMIB group The ifMIB group is implemented in Fabric OS v5.3.0 and later versions to support FCIP tunnels. There are entries in the ifXTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). The ifXtable is used to support 64-bit FC statistics counters. TABLE 16 Object and OID Access Description ifXTable 1.3.6.1.2.1.31.1.1 Not accessible A list of interface entries.
PAGE 72
2 ifMIB group TABLE 16 Object and OID Access Description ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 Read only The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a Broadcast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
PAGE 73
ifMIB group 2 TABLE 16 Object and OID Access Description ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 Read only The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
PAGE 74
2 Generic traps TABLE 16 Object and OID Access Description ifAlias 1.3.6.1.2.1.31.1.1.1.18 Read-write This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string.
PAGE 75
Generic traps 2 TABLE 17 Trap name and OID Description linkDown 1.3.6.1.6.3.1.1.5.3 A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
PAGE 76
2 56 Generic traps Fabric OS MIB Reference 53-1002750-01
PAGE 77
Chapter 3 RMON MIB Objects In this chapter • RMON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RMON group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • History group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 78
3 RMON MIB overview - statistics 1.3.6.1.2.1.16.1 - etherStatsTable 1.3.6.1.2.1.16.1.1 - etherStatsEntry 1.3.6.1.2.1.16.1.1.1 - etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 - etherStatsDataSource 1.3.6.1.2.1.16.1.1.1.2 - etherStatsDropEvents 1.3.6.1.2.1.16.1.1.1.3 - etherStatsOctets 1.3.6.1.2.1.16.1.1.1.4 - etherStatsPkts 1.3.6.1.2.1.16.1.1.1.5 - etherStatsBroadcastPkts 1.3.6.1.2.1.16.1.1.1.6 - etherStatsMulticastPkts 1.3.6.1.2.1.16.1.1.1.7 - etherStatsCRCAlignErrors 1.3.6.1.2.1.16.1.1.1.
PAGE 79
RMON MIB overview 3 - alarm 1.3.6.1.2.1.16.3 - alarmTable 1.3.6.1.2.1.16.3.1 - alarmEntry 1.3.6.1.2.1.16.3.1.1 - alarmIndex 1.3.6.1.2.1.16.3.1.1.1 - alarmInterval 1.3.6.1.2.1.16.3.1.1.2 - alarmVariable 1.3.6.1.2.1.16.3.1.1.3 - alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 - alarmValue 1.3.6.1.2.1.16.3.1.1.5 - alarmStartupAlarm 1.3.6.1.2.1.16.3.1.1.6 - alarmRisingThreshold 1.3.6.1.2.1.16.3.1.1.7 - alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 - alarmRisingEventIndex 1.3.6.1.2.1.16.3.1.1.
PAGE 80
3 RMON group TABLE 18 MIB-II textual conventions Type definition Value Description OwnerString Octet String of size 0 to 127 The data type used to model an administratively assigned name of the owner of a resource. EntryStatus Integer The status of a table entry. 1 valid 2 createRequest 3 underCreation 4 invalid RMON group Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network.
PAGE 81
Statistics group 3 TABLE 19 Object and OID Access Description etherStatsBroadcastPkts 1.3.6.1.2.1.16.1.1.1.6 Read only The total number of good packets received that were directed to the broadcast address. NOTE: This number does not include multicast packets. etherStatsMulticastPkts 1.3.6.1.2.1.16.1.1.1.7 Read only The total number of good packets received that were directed to a multicast address. NOTE: This number does not include packets directed to the broadcast address.
PAGE 82
3 History group TABLE 19 Object and OID Access Description etherStatsPkts512to102 3Octets 1.3.6.1.2.1.16.1.1.1.18 Read only The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). etherStatsPkts1024to15 18Octets 1.3.6.1.2.1.16.1.1.1.
PAGE 83
History group 3 TABLE 20 Object and OID Access Description historyControlOwner 1.3.6.1.2.1.16.2.1.1.6 Read-write The entity that configured this entry and is therefore using the resources assigned to it. historyControlStatus 1.3.6.1.2.1.16.2.1.1.7 Read-write The status of this historyControl entry. Ethernet history group TABLE 21 Object and OID Access Description etherHistoryTable 1.3.6.1.2.1.16.2.2 Not accessible A list of Ethernet history entries. etherHistoryEntry 1.3.6.1.2.1.16.2.2.
PAGE 84
3 Alarm group TABLE 21 Object and OID Access Description etherHistoryUndersizePkt Read only s 1.3.6.1.2.1.16.2.2.1.10 The number of packets received during this sampling interval that were less than 64 octets (excluding framing bits but including FCS octets) but were otherwise well formed. etherHistoryOversizePkts 1.3.6.1.2.1.16.2.2.1.
PAGE 85
Event group 3 TABLE 22 Object and OID Access Description alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 Read-write The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval.
PAGE 86
3 Event group TABLE 23 66 Object and OID Access Description eventEntry 1.3.6.1.2.1.16.9.1.1 Not accessible A set of parameters that describe an event to be generated when certain conditions are met. eventIndex 1.3.6.1.2.1.16.9.1.1.1 Read only An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. eventDescription 1.3.6.1.2.1.16.9.1.1.2 Read-write A comment describing this event entry.
PAGE 87
RMON Traps 3 RMON Traps TABLE 24 Trap name and OID Variables rmonEventsV2 1.3.6.1.2.1.16.0 Fabric OS MIB Reference 53-1002750-01 Description Definition point for RMON notifications. risingAlarm 1.3.6.1.2.1.16.0.1 “alarmIndex” “alarmVariable” “alarmSampleType” “alarmValue” “alarmRisingThreshold” The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. fallingAlarm 1.3.6.1.2.1.16.0.
PAGE 88
3 68 RMON Traps Fabric OS MIB Reference 53-1002750-01
PAGE 89
Chapter 4 FE MIB Objects In this chapter • FE MIB overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 • FIBRE-CHANNEL-FE-MIB (MIB-II branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 • fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 • fcFeStatus group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 • fcFeError group . .
PAGE 90
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 25 FE MIBs and supported Fabric OS versions (Continued) Fabric OS version FIBRE-CHANNEL-FE-MIB (MIB-II branch) FCFABRIC-ELEMENT-MIB (experimental branch) v6.1.0 Yes No v6.0.0 Yes No v5.x Yes No v4.x Yes No v3.1.x Yes No v3.0.x Yes Yes v2.6.x No Yes NOTE The port swap feature does not have any effect on SNMP for FE MIB.
PAGE 91
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 FIBRE-CHANNEL-FE-MIB organization Figure 23 through Figure 28 depict the organization and structure of FIBRE-CHANNEL-FE-MIB.
PAGE 92
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 - fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 - fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 - fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.
PAGE 93
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 - fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.
PAGE 94
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.
PAGE 95
FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 26 4 FIBRE-CHANNEL-FE-MIB definitions Type definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds. Microseconds Integer from 0 to 2147383647 Represents time unit value in microseconds.
PAGE 96
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 26 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
PAGE 97
fcFeConfig group TABLE 26 4 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description FcFeFxPortCapacity Integer from 1 to 640 Maximum number of Fx_Ports within a module. For the Brocade 300, this value is 24. For the Brocade 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32. For the Brocade 5100, this value is 40. For the Brocade 5300, this value is 80. For the Brocade 7500 or 7500E, this value is 32.
PAGE 98
4 fcFeConfig group TABLE 27 78 Object and OID Access Description fcFeFabricName 1.3.6.1.2.1.75.1.1.1 Read-write The Name_Identifier of the fabric to which this fabric element belongs. This object returns the WWN of the primary switch in the fabric. fcFeElementName 1.3.6.1.2.1.75.1.1.2 Read-write The Name_Identifier of the fabric element. This object returns the WWN of the switch. fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.
PAGE 99
fcFeConfig group 4 TABLE 27 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 Read only The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous.
PAGE 100
4 fcFeStatus group TABLE 27 Object and OID Access Description fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 Read only The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 Read only The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier.
PAGE 101
fcFeStatus group 4 TABLE 28 Object and OID Access Description fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 Not accessible A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 Not accessible An entry containing operational status and parameters of an Fx_Port. fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 Read only The address identifier by which this Fx_Port is identified within the fabric.
PAGE 102
4 fcFeStatus group TABLE 28 82 Object and OID Access Description fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 Read only The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port operational status has not changed since the agent last restarted. fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 Read only The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect loss of synchronization.
PAGE 103
fcFeError group 4 TABLE 28 Object and OID Access Description fcFxPortClass3SeqDelivA greed 1.3.6.1.2.1.75.1.2.3.1.9 Read only A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) - The Fx_Port has agreed to support Class 3 sequential delivery from the fabric login.
PAGE 104
4 fcFeAccounting group TABLE 29 Object and OID Access Description fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 Read only The number of loss of signal errors detected by the Fx_Port. fcFxPortPrimSeqProtoErr ors 1.3.6.1.2.1.75.1.3.1.1.4 Read only The number of primitive sequence protocol errors detected by the Fx_Port. fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 Read only The number of invalid transmission word errors detected by the Fx_Port. fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.
PAGE 105
fcFeAccounting group 4 TABLE 30 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 Read only The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 Read only The number of Class 1 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.
PAGE 106
4 fcFeCapabilities group TABLE 30 Object and OID Access Description fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 Read only The number of Class 3 frames received by this Fx_Port from its attached Nx_Port. fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 Read only The number of Class 3 frames delivered through this Fx_Port to its attached Nx_Port. fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.
PAGE 107
FCFABRIC-ELEMENT-MIB (experimental branch) 4 TABLE 31 Object and OID Access Description fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 Read only A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.
PAGE 108
4 FCFABRIC-ELEMENT-MIB (experimental branch) • Capability FCFABRIC-ELEMENT-MIB organization Figures 29 through 34 depict the organization and structure of FCFABRIC-ELEMENT-MIB.
PAGE 109
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.
PAGE 110
4 FCFABRIC-ELEMENT-MIB (experimental branch) - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.
PAGE 111
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeAcct (-- Not Supported --) FIGURE 33 fcFeAcct hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 - fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 - fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 - fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 - fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.
PAGE 112
4 FCFABRIC-ELEMENT-MIB (experimental branch) TABLE 32 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description FabricName FcNameId The name identifier of a fabric. Each fabric provides a unique fabric name. Only the following formats are allowed: IEEE48 Local FcPortName FcNameId The name identifier associated with a port.
PAGE 113
fcFeConfig group TABLE 32 4 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description Fc0MediaCap Integer from 0 to 65535 bit 0 (unknown) bit 1 (single mode fibre (sm)) bit 2 (multimode fiber 50 micron (m5)) bit 3 (multimode fiber 62.
PAGE 114
4 fcFeConfig group Implementation of this group is mandatory. TABLE 33 94 Object and OID Access Description fcFabricName 1.3.6.1.3.42.2.1.1.1 Read only The Name_Identifier of the fabric to which this fabric element belongs. This object returns the WWN of the primary switch in the fabric. fcElementName 1.3.6.1.3.42.2.1.1.2 Read only The Name_Identifier of the fabric element. This object returns the WWN of the switch. fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.
PAGE 115
fcFeConfig group 4 TABLE 33 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcFxConfTable 1.3.6.1.3.42.2.1.1.5 Not accessible A table that contains, one entry for each Fx_Port in the fabric element, configuration and service parameters of the Fx_Ports. fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 Not accessible An entry containing the configuration and service parameters of an Fx_Port. fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.
PAGE 116
4 fcFeOp group TABLE 33 Object and OID Access Description fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 Read only A value indicating the mode of stacked connect supported by the Fx_Port. fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 Read only A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port. Valid values: • yes (1) • no (2) fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.
PAGE 117
fcFeOp group 4 TABLE 34 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 Read only The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Ports during fabric login. fcFPortAttachedPortName Read only 1.3.6.1.3.42.2.1.2.1.1.4 The port name of the attached N_Port, if applicable.
PAGE 118
4 fcFeOp group TABLE 34 98 Object and OID Access Description fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 Read only The current operational status of the Fx_Port: • online (1) Log in might proceed. • offline (2) Log in cannot proceed. • testing (3) Port is under test. link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
PAGE 119
fcFeError group 4 TABLE 34 Object and OID Access Description fcFxPortIntermixSuppAgre ed 1.3.6.1.3.42.2.1.2.4.1.8 Read only A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported. Valid values: • yes (1) • no (2) fcFxPortStackedConnMod eAgreed 1.3.6.1.3.42.2.1.2.4.1.
PAGE 120
4 fcFeAcct group TABLE 35 Object and OID Access Description fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 Not accessible This table contains one entry for each Fx_Port in the fabric element, and counters recording numbers of errors detected since the management agent re-initialized. The first six columnar objects after the port index correspond to the counters in the Link ErrorStatus Block. fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 Not accessible An entry containing error counters of an Fx_Port.
PAGE 121
fcFeCap group 4 fcFeCap group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the configuration group. Implementation of this group is optional. TABLE 36 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcFxPortCapTable 1.3.6.1.3.42.2.1.5.
PAGE 122
4 fcFeCap group TABLE 36 Object and OID 102 Access Description fcFxPortCapClass2SeqDel Read only iv 1.3.6.1.3.42.2.1.5.1.1.12 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery. Valid values: • yes (1) • no (2) fcFxPortCapClass3SeqDel Read only iv 1.3.6.1.3.42.2.1.5.1.1.13 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery. Valid values: • yes (1) • no (2) fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.
PAGE 123
Chapter 5 Entity MIB Objects In this chapter • Entity MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Textual conventions for Entity MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Entity MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Physical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Logical entity group . . . . .
PAGE 124
5 Entity MIB overview - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 35 Overall tree structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.1 - entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 - entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 - entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.
PAGE 125
Entity MIB overview 5 - entityMapping - entLPMappingTable 1.3.6.1.2.1.47.1.3.1 - entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 - entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 - entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 - entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 - entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 - entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 - entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 - entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 - entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.
PAGE 126
5 Textual conventions for Entity MIB TABLE 37 Objects imported into the Entity MIB (Continued) Object Imported from this module TDomain SNMPv2-TC TAddress TEXTUAL-CONVENTION AutonomousType RowPointer TimeStamp TruthValue MODULE-COMPLIANCE SNMPv2-CONF OBJECT-GROUP NOTIFICATION-GROUP SnmpAdminString SNMP-FRAMEWORK-MIB Textual conventions for Entity MIB PhysicalIndex Arbitrary value that uniquely identifies the physical entity.
PAGE 127
SnmpEngineIdOrNone TABLE 38 5 Possible values for PhysicalClass (Continued) Values Description backplane (4) The physical entity class is a device for aggregating and forwarding networking traffic, such as a shared backplane in a modular Ethernet switch. Note that an agent might model a backplane as a single physical entity, which is actually implemented as multiple discrete physical components (within a chassis or stack).
PAGE 128
5 Entity MIB objects Entity MIB objects The Entity MIB objects are divided into the following groups: • Physical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Logical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Entity mapping group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • General group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 129
Physical entity group 5 TABLE 39 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 Read only The value of entPhysicalIndex for the physical entity that “contains” this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity. Note that the set of containment relationships define a strict hierarchy; that is, recursion is not allowed.
PAGE 130
5 Physical entity group TABLE 39 110 Object and OID Access Description entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.
PAGE 131
Physical entity group 5 TABLE 39 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.
PAGE 132
5 Physical entity group TABLE 39 112 Object and OID Access Description entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 Read only An indication of the relative position of this child component among all its sibling components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects.
PAGE 133
Physical entity group 5 TABLE 39 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 Read only The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present).
PAGE 134
5 Physical entity group TABLE 39 Object and OID Access Description entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 Read-write The vendor-specific serial number string for the physical entity. The preferred value is the serial number actually printed on the component (if present). On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent.
PAGE 135
Physical entity group 5 TABLE 39 Object and OID Access Description entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 Read-write This object is an alias name for the physical entity as specified by a network manager; it provides a nonvolatile handle for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string.
PAGE 136
5 Physical entity group TABLE 40 116 entPhysicalTable entries for Brocade switches (Continued) Platform Blades Fans Power supply WWN card Brocade 3250 1 3 fans not a FRU 1 PS not a FRU 1 WWN unit not a FRU Brocade 3850 1 4 fans not a FRU 2 PS not a FRU 1 WWN unit not a FRU Brocade 3900 1 6 fans in 3 FRUs 2 PS 1 WWN unit not a FRU Brocade 4012 NA NA NA NA Brocade 4100 1 3 FRUs 2 PS 1 WWN unit not a FRU Brocade 4900 1 3 FRUs 2 PS 1 WWN unit not a FRU Brocade 5000 1 3
PAGE 137
Logical entity group TABLE 40 5 entPhysicalTable entries for Brocade switches (Continued) Platform Blades Fans Power supply WWN card Brocade 7800 Extension Switch 1 2 fans 2 PS 1 WWN unit. Not a FRU. Brocade VA-40FC 1 2 fans 2 PS 1 WWN unit. Not a FRU.
PAGE 138
5 Entity MIB conformance information Entity MIB conformance information This section lists the entityConformance MIBs. Figure 41 on page 105 shows the structure of the entityConformance group. TABLE 41 object and OID Access Description entityCompliance 1.3.6.1.2.1.47.3.1.1 Not accessible The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
PAGE 139
Entity MIB conformance information 5 TABLE 41 object and OID Access Description entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 Not accessible The collection of objects used to represent physical system components, for which a single agent provides management information. Objects: • entPhysicalDescr • entPhysicalVendorType • entPhysicalContainedIn • entPhysicalClass • entPhysicalParentRelPos • entPhysicalName entityLogicalGroup 1.3.6.1.2.1.47.3.2.
PAGE 140
5 Entity MIB conformance information TABLE 41 120 object and OID Access Description entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 Not accessible The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
PAGE 141
Entity MIB conformance information Fabric OS MIB Reference 53-1002750-01 5 121
PAGE 142
5 122 Entity MIB conformance information Fabric OS MIB Reference 53-1002750-01
PAGE 143
Chapter 6 SW-MIB Objects In this chapter • SW-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • sw traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Switch system group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Switch Fabric group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 144
6 SW-MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - sw - swTrapsV2 - swSystem - swFabric - swModule - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - swTopTalker - swCpuorMemoryUsage - swConnUnitPortStatExtentionTable - sw28k - sw21kN24k - sw20x0 - bcsiReg - bcsiModules - bcsiModculeTC - swMibModule FIGURE 43 SW-MIB overall tree structure - swTrapsV2 - swFault 1.3.6.1.4.1.1588.2.1.1.1.0.
PAGE 145
SW-MIB overview 6 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 146
6 SW-MIB overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 - swNbIslState 1.3.6.1.4.1.
PAGE 147
SW-MIB overview 6 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 148
6 SW-MIB overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
PAGE 149
SW-MIB overview 6 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 150
6 SW-MIB overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
PAGE 151
SW-MIB overview 6 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
PAGE 152
6 SW-MIB overview - swConnUnitPortStatExtentionTable - swConnUnitPortStatEntry 1.3.6.1.4.1.1588.2.1.1.1.27.1 - swConnUnitCRCWithBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.1 - swConnUnitZeroTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.2 - swConnUnitFLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.3 - swConnUnitNLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.4 - swConnUnitStopTenancyStarVation 1.3.6.1.4.1.1588.2.1.1.1.27.1.5 - swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1.27.1.6 - swConnUnitTransferConnection 1.3.6.1.4.1.1588.2.1.
PAGE 153
SW-MIB overview TABLE 42 6 SW-MIB textual conventions (Continued) Type definition Value Description SwFwActs Integer Valid Fabric Watch actions: 0 swFwNoAction 1 swFwErrlog 2 swFwSnmptrap 3 swFwErrlogSnmptrap 4 swFwPortloglock 5 swFwErrlogPortloglock 6 swFwSnmptrapPortloglock 7 swFwErrlogSnmptrapPortloglock 8 swFwRn 9 swFwElRn 10 swFwStRn 11 swFwElStRn 12 swFwPlRn 13 swFwElPlRn 14 swFwStPlRn 15 swFwElStPlRn 16 swFwMailAlert 17 swFwMailAlertErrlog 18 swFwMailAlertSnmptrap 19 swFwMailAlertErrlogSnmpt
PAGE 154
6 SW-MIB overview TABLE 42 SW-MIB textual conventions (Continued) Type definition Value Description SwFwClassesAreas Integer Index of Fabric Watch classes and areas where thresholds can be monitored: Environment class: 1 swFwEnvTemp 2 swFwEnvFan (Not supported) 3 swFwEnvPS (Not supported) SFP class: 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 57 swFwTransceiverVoltage Port class: 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWo
PAGE 155
sw traps TABLE 42 6 SW-MIB textual conventions (Continued) Type definition Value Description EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature.
PAGE 156
6 sw traps TABLE 43 SW-MIB traps Trap name Commands to configure “swFault” on page 137 (not supported) N.A. “swSensorScn” on page 137 N.A. “swFCPortScn” on page 137 Always on “swEventTrap” on page 138 For more information, refer to the snmpConfig command in the Fabric OS Command Reference.
PAGE 157
sw traps 6 TABLE 44 Trap name and OID Variables Description swFault 1.3.6.1.4.1.1588.2.1.1.1 .0.1 swDiagResult swSsn This trap is no longer generated. A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE swSensorScn 1.3.6.1.4.1.1588.2.1.1.1 .0.2 swSensorStatus swSensorIndex swSensorType swSensorValue swSensorInfo swSsn Switch is faulty.
PAGE 158
6 sw traps TABLE 44 Trap name and OID Variables Description swEventTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.4 swEventIndex swEventTimeInfo swEventLevel swEventRepeatCount swEventDescr swSsn swVfId This trap is generated when an event occurs with a level that is at or below swEventTrapLevel. #TYPE #SUMMARY A firmware event has been logged.
PAGE 159
sw traps 6 TABLE 44 Trap name and OID Variables Description swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.6 swTrackChangesInfo swSsn swVfId Trap to be sent for tracking log in, log out, or configuration changes. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE Track changes has generated a trap.
PAGE 160
6 sw traps TABLE 44 Trap name and OID Variables Description swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.10 swFCPortIndex swFCPortName swSsn swFCPortFlag swVfId The trap to be sent for tracking segmentation changes. swExtTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.11 The trap adds the SSN binding to the traps if it is enabled. This is an internal trap. swStateChangeTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.12 swOperStatus swVfId This trap is sent when the switch changes it state to online or offline.
PAGE 161
Switch system group 6 Switch system group TABLE 45 Object and OID Access Description swSystem 1.3.6.1.4.1.1588.2.1.1.1.1 Not accessible The OID sub-tree for switch system group. swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 Read only The current date and time. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 162
6 Switch system group TABLE 45 Object and OID Access Description swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 Read only The date and time when the firmware was last downloaded or the configuration file was last changed. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 163
Switch system group 6 TABLE 45 Object and OID Access Description swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 Read only The current operational status of the switch. Possible values are: • online (1) - The switch is accessible by an external Fibre Channel port. • offline (2) - The switch is not accessible. • testing (3) - The switch is in a built-in test mode and is not accessible by an external Fibre Channel port. • faulty (4) - The switch is not operational. swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 164
6 Switch system group TABLE 45 144 Object and OID Access Description swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 Read-write The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. Possible values are: • swCurrent (1) - The flash contains the current firmware image or configuration file.
PAGE 165
Switch system group 6 TABLE 45 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 Read-write The desired status of the switch beacon. Possible values are: • on (1) - The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. • off (2) - Set each LED to its regular status, indicating color and state. swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 166
6 Switch system group TABLE 45 146 Object and OID Access Description swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22 .1.4 Read only The current value (reading) of the sensor. The value -2147483648 represents the maximum value of integer value; it also means that the sensor does not have the capability to measure the actual value. In v2.0, the temperature sensor value is in Celsius, the fan value is in RPM (revolutions per minute), and the power supply sensor reading is unknown.
PAGE 167
Switch system group 6 TABLE 45 Object and OID Access Description swBrcdTrapBitMask 1.3.6.1.4.1.1588.2.1.1.1.1.34 Not accessible This represents the type of notification by a single bit. 0x01 - Fabric change event 0x02 - Device change event 0x04 - FAPWWN change event 0x08 - FDMI events swFCPortPrevType 1.3.6.1.4.1.1588.2.1.1.1.1.35 Not accessible This represents the port type of a port before it goes online or offline and it is valid only in swFcPortSCN trap.
PAGE 168
6 Switch system group TABLE 46 Temp Fans Power supply swNumSensors / connUnitNumSensors Brocade 5424 3 sensors NA NA 3 Brocade 5450 2 sensors NA NA 2 Brocade 5460 2 sensors NA NA 2 Brocade 5470 2 sensors NA NA 2 Brocade 5480 2 sensors NA NA 2 Brocade 5481 2 sensors NA NA 2 Brocade 7500 3 sensors 3 fans 2 PS 18 Brocade 7600 3 sensors 3 fans 2 PS 18 Brocade 7800 Extension Switch 3 sensor 2 fans 2 PS 7 Brocade 12000 10 sensors 3 fans 4 PS 17 Brocade 2400
PAGE 169
Switch Fabric group TABLE 47 6 Blade table (Continued) Model Temp sensors FC8-48 7 sensors FC8-64 8 sensors FC8-32E 7 sensors FC8-48E 7 sensors CP8 4 sensors Core8 4 sensors CR4S-8 4 sensors Switch Fabric group TABLE 48 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swFabric 1.3.6.1.4.1.1588.2.1.1.1 .2 Not accessible The OID sub-tree for the switch Fabric group. swDomainID 1.3.6.1.4.1.1588.2.1.1.1 .2.
PAGE 170
6 Switch Fabric group TABLE 48 150 Object and OID Access Description swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.4 Read only This is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.5 Read only The baud rate of the ISL. It is always unknown (0).
PAGE 171
Switch agent configuration group 6 TABLE 48 Object and OID Access Description swPmgrEventDescr 1.3.6.1.4.1.1588.2.1.1.1 .2.14 Not accessible This object identifies the textual description of the events mentioned in swPmgrEventType. swVfId 1.3.6.1.4.1.1588.2.1.1.1 .2.15 Read only The virtual Fabric ID of the switch. swVfName 1.3.6.1.4.1.1588.2.1.1.1 .2.16 Read only This represents the virtual switch name configured in the switch.
PAGE 172
6 Fibre Channel port group TABLE 49 Object and OID Access Description swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.3 Read-write This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.
PAGE 173
Fibre Channel port group 6 TABLE 50 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.2 Read only The type of ASIC for the switch port.
PAGE 174
6 Fibre Channel port group TABLE 50 154 Object and OID Access Description swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.6 Read-write Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Possible values are: • enabled (1) - The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop).
PAGE 175
Fibre Channel port group 6 TABLE 50 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.21 Read only Counts the number of encoding error or disparity error inside frames received. swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.22 Read only Counts the number of CRC errors detected for frames received. swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.
PAGE 176
6 Name Server database group TABLE 50 Object and OID Access Description swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.35 Read-write The desired baud rate for the port. The baud rate can be 1 Gbps, 2 Gbps, autonegotiate, or 4 Gbps or 8 Gbps. 4 Gbps is only applicable to the Brocade 4100, 4900, 7500, 7600, and 48000. 8 Gbps is only applicable to the Brocade DCX director. NOTE: This object is deprecated. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.36 Read only swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.
PAGE 177
Name Server database group 6 TABLE 51 Object and OID Access Description swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 Not accessible An entry from the local Name Server database. swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 Read only The index of the Name Server database entry. swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 Read only The Fibre Channel port address ID of the entry. swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 Read only The type of port for this entry.
PAGE 178
6 Event group TABLE 51 Object and OID Access Description swNsFc4 Read only 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 The FC-4s supported by the port, as defined in FC-GS-2. swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 2 Read only The object identifies IpAddress of the Nx_Port for the entry. swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 3 Read only The object identifies the World Wide Name (WWN) of the Fx_Port for the entry. swNsHardAddr Read only 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
PAGE 179
Fabric Watch group 6 TABLE 52 Object and OID Access Description swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.2 Read only The date and time that this event occurred. The return string is displayed using the following format: YYYY/MM/DD-hh:mm:ss Where: YYYY = Year MM = Month DD = Date hh = Hour mm = Minute ss = Seconds For example: 2005/12/05-07:33:41 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.3 Read only The severity level of this event entry.
PAGE 180
6 Fabric Watch group TABLE 53 160 Object and OID Access Description swFwSystem 1.3.6.1.4.1.1588.2.1.1.1.10 Not accessible The OID sub-tree for switch Fabric Watch group. swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 Read only This OID indicates whether the switch has proper Fabric Watch license or not. If the license key is installed on the switch for Fabric Watch, the return value is swFwLicensed; otherwise, the value is swFwNotLicensed. swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.
PAGE 181
Fabric Watch group 6 TABLE 53 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 Read-write A customizable polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 0 Read-write A customizable low-threshold value for a Fabric Watch classArea combination. swFwCustHigh 1.3.6.1.4.1.
PAGE 182
6 Fabric Watch group TABLE 53 162 Object and OID Access Description swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 6 Read only Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 7 Read only Default action matrix for below event. swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 8 Read only Default action matrix for above event.
PAGE 183
Fabric Watch group 6 TABLE 53 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 6 Read-write Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
PAGE 184
6 Fabric Watch group TABLE 53 Object and OID Access Description swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Read only Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1).
PAGE 185
Fabric Watch group 6 TABLE 53 Object and OID Access swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 Read only swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Read only Description Last event value of the threshold. NOTE: This object is deprecated. Last event time of the threshold. This value is in the same format as in swCurrentDate. NOTE: This object is deprecated. swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Read only Last state type of the threshold.
PAGE 186
6 Fabric Watch group TABLE 54 166 swFwName objects and object types (Continued) swFwName objects (swFwName) Object types (Threshold names) eportProtoErr007 E Port Protocol Errors 7 eportRXPerf007 E Port RX Performance 7 eportSignal007 E Port Loss of Signal 7 eportState007 E Port State Changes 7 eportSync007 E Port Loss of Sync 7 eportTXPerf007 E Port TX Performance 7 eportWords007 E Port Invalid Words 7 eportLinkreset007 E Port Link Reset 7 eportUtil007 E Port Util 7 (Not supported)
PAGE 187
Fabric Watch group TABLE 54 Fabric OS MIB Reference 53-1002750-01 6 swFwName objects and object types (Continued) swFwName objects (swFwName) Object types (Threshold names) portWords000 Port Invalid Words 0 portLinkReset000 Port Link Reset 0 portc3DiscardTo000 Port C3 Discard 0 fopportCRCs013 FOP Port Invalid CRCs 13 fopportLink013 FOP Port Link Failures 13 fopportProtoErr0 FOP Port Protocol Errors 13 fopportRXPerf013 FOP Port RX Performance 13 fopportSignal013 FOP Port Loss of Signal
PAGE 188
6 End device group TABLE 54 swFwName objects and object types (Continued) swFwName objects (swFwName) Object types (Threshold names) secILLCmd000 Security Illegal Command 0 resFlash000 Resource Flash 0 EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500) while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade.
PAGE 189
Switch group 6 TABLE 55 Object and OID Access Description swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 Read only Link failure count for the end device. swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 Read only Sync loss count for the end device. swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 Read only Signal loss count for the end device. swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 Read only Protocol error count for the end device. swEndDeviceInvalidWord 1.
PAGE 190
6 Bloom performance monitor group TABLE 56 Object and OID Access Description swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2. 1.2 Read only This object identifies the WWN of the member switch. swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2. 1. Read only This object identifies the position of the member switch in the group, based on the order that the switches were added in the group. NOTE: This object is obsolete.
PAGE 191
Bloom performance monitor group 6 TABLE 57 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.2 Read only This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual reference key. swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.
PAGE 192
6 Trunking group Trunking group TABLE 58 172 Object and OID Access Description swTrunk 1.3.6.1.4.1.1588.2.1.1.1.24 Not accessible The OID sub-tree for swTrunk group. swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 Not accessible This object indicates whether the switch supports the trunking feature or not: • no (0) • yes (8) swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 Not accessible This object displays trunking information for the switch.
PAGE 193
Toptalker group 6 TABLE 58 Object and OID Access Description swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3. 1.3 Read only Gives the aggregate value of the transmitted words from this trunk group. swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3. 1.4 Read only NOTE: The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port.
PAGE 194
6 CPU or memory usage group TABLE 59 Object and OID Access Description swTopTalkerMntDpid 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.4 Read only This object identifies the DID of the SID-DID pair. swTopTalkerMntflow 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.5 Read only This object identifies the traffic flow in MB/sec. swTopTalkerMntSwwn 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.6 Read only This object identifies the SID of the host in WWN format. swTopTalkerMntDwwn 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.
PAGE 195
Switch connectivity unit port statistics extension table 6 TABLE 60 Object and OID Access Description swMemUsageLimit 1.3.6.1.4.1.1588.2.1.1.1. 26.8 Read only The memory usage limit. This OID specifies the in-between threshold value. swMemPollingInterval 1.3.6.1.4.1.1588.2.1.1.1. 26.9 Read only The time after which the next memory usage sample will be taken. swMemAction 1.3.6.1.4.1.1588.2.1.1.1. 26.10 Read only The action to be taken if the memory usage exceed the specified threshold limit.
PAGE 196
6 Switch connectivity unit port statistics extension table TABLE 61 Object and OID 176 Access Description swConnUnitStopTenancySt Read only arVation 1.3.6.1.4.1.1588.2.1.1.1. 27.1.5 This counter is incremented when the FL_port cannot transmit a frame because of lack of credit. swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1. 27.1.6 Read only The number of times FC port entered OPENED state. swConnUnitTransferConne ction 1.3.6.1.4.1.1588.2.1.1.1. 27.1.
PAGE 197
Switch connectivity unit port statistics extension table 6 TABLE 61 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swConnUnitUnknownInterr upts 1.3.6.1.4.1.1588.2.1.1.1. 27.1.20 Read only The object represents the unknown interrupts received on a port. swConnUnitTimedOut 1.3.6.1.4.1.1588.2.1.1.1. 27.1.21 Read only The object represents the number of frames that have been timed out due to any reason. swConnUnitProcRequired 1.3.6.1.4.1.1588.2.1.1.1. 27.1.
PAGE 198
6 178 Switch connectivity unit port statistics extension table Fabric OS MIB Reference 53-1002750-01
PAGE 199
Chapter 7 High-Availability MIB Objects In this chapter • HA-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • High-Availability group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU history table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 200
7 HA-MIB overview - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 - fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 - fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 - fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
PAGE 201
High-Availability group TABLE 62 7 Objects imported into the HA-MIB (Continued) Object Imported from this module DisplayString SNMPv2-TC TimeStamp High-Availability group This section describes the MIB objects in the High-Availability group. TABLE 63 Object and OID Access Description haStatus 1.3.6.1.4.1.1588.2.1.2.1 .1 Read only Indicates whether the system is redundant. Possible values are: • redundant (0) Dual CP with standby CP ready to take over.
PAGE 202
7 FRU table TABLE 64 Object and OID Access Description fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 Read only The current status of the FRU object in the slot. Valid values: • other (1) • unknown (2) • on (3) • off (4) • faulty (5) fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 Read only The slot number of the blade, and the unit number for everything else. fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 Read only The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
PAGE 203
FRU history table TABLE 65 7 Valid FRU counts for the various Brocade switches (Continued) Platform Blades Fans Power supply WWN card Brocade DCX 8 port blades 2 CP blades 3 fans 4 PS 2 WWNs Brocade DCX-4S 4 port blades 2 CP blades 2 fans 4 PS 2 WWNs Brocade 300 NA 3 fans 1 PS NA Brocade 5100 NA 2 fans 2 PS NA Brocade 5300 NA 3 fans 2 PS NA Brocade 8000 NA 3 FRUs 2 PS NA Brocade 7800 Extension Switch NA 2 fans 2 PS NA Brocade 6505 1 2 fans 2 PS 1 WWN Brocade
PAGE 204
7 CP table TABLE 66 Object and OID Access Description fruHistoryClass Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event. Valid values: • other (1) • unknown (2) • chassis (3) • cp (4) • other-CP (5) • switchblade (6) • wwn (7) • powerSupply (8) • fan (9) • CoreBlade (10) • ApplicationBlade (11) fruHistoryObjectNum Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 The slot number of the blade and the unit number for everything else. fruHistoryEvent Read only 1.3.6.1.4.
PAGE 205
HA-MIB traps 7 TABLE 67 Object and OID Access Description cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 Read only The IP mask of the Ethernet interface of this CP. cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 Read only The IP address of the IP gateway for this CP. cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 Read only The last event related to this CP.
PAGE 206
7 186 HA-MIB traps Fabric OS MIB Reference 53-1002750-01
PAGE 207
Chapter 8 FICON MIB Objects In this chapter • FICON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON RNID group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON LIRR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON RLIR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 208
8 FICON MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 62 Overall tree structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 - nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 - nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 - nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
PAGE 209
FICON MIB overview 8 - LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 - LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 - LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 - LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 - LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 - ficonRLIR - rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 - rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 - rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 - rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 - rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.
PAGE 210
8 FICON MIB overview TABLE 69 190 FICON MIB textual conventions (Continued) Name Status Description Syntax RLIRLinkFailureType Current Represents the link failure type. INTEGER { bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8) } RNIDManufacturer Current Represents the Manufacturer name or code.
PAGE 211
FICON RNID group 8 FICON RNID group This group contains all Request Node Identification Data (RNID) group objects for FICON. TABLE 70 Object and OID Access Description nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2. 1 Read only The number of entries in Request Node Identification Data (RNID) table. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command Reference. nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.
PAGE 212
8 FICON RNID group TABLE 70 192 Object and OID Access Description nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.11 Read only Port type (N, NL, E, or virtual port) of the connected port. nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.12 Read only Node identification data format of the connected port. nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.13 Read only Node identification tag of the connected port. nodeRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.
PAGE 213
FICON LIRR group 8 TABLE 70 Object and OID Access Description switchRNIDSequenceNumbe r 1.3.6.1.4.1.1588.2.1.1.50.2. 4.1.8 Read only Identifies the sequence number of the switch. switchRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2. 4.1.9 Read only Identification tag of the switch. switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2. 4.1.10 Read only Identifies the parameters of the switch. nodeVfId 1.3.6.1.4.1.1588.2.1.1.50.2. 5 Read only The Virtual Fabric ID of the switch.
PAGE 214
8 FICON RLIR group TABLE 71 Object and OID Access Description LIRRPortType 1.3.6.1.4.1.1588.2.1.1.5 0.3.2.1.6 Read only Attached port type. LIRRFormat 1.3.6.1.4.1.1588.2.1.1.5 0.3.2.1.7 Read only Registration type: conditional or unconditional. FICON RLIR group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. TABLE 72 194 Object and OID Access Description rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.
PAGE 215
LinkIncident MIB traps group 8 TABLE 72 Object and OID Access Description rLIRTimeStamp 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 Read only RLIR time stamp. rLIRFormat 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 Read only RLIR Format. LinkIncident MIB traps group TABLE 73 Trap name and OID Variables linkIncidentMIBTrapPrefix 1.3.6.1.4.1.1588.2.1.1.50.21.0 linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 Fabric OS MIB Reference 53-1002750-01 Description The Link Incident traps.
PAGE 216
8 196 LinkIncident MIB traps group Fabric OS MIB Reference 53-1002750-01
PAGE 217
Chapter 9 FibreAlliance MIB Objects In this chapter • FibreAlliance MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Connectivity unit group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Service group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 218
9 FibreAlliance MIB overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + connUnitEventTable 1.3.6.1.3.94.1.11 + connUnitLinkTable 1.3.6.1.3.94.1.12 - trapReg - trapMaxClients 1.3.6.1.3.94.2.1 - trapClientCount 1.3.6.1.3.94.2.2 + trapRegTable 1.3.6.1.3.94.2.3 - revisionNumber 1.3.6.1.3.
PAGE 219
FibreAlliance MIB overview 9 - connUnitTable 1.3.6.1.3.94.1.6 - connUnitEntry 1.3.6.1.3.94.1.6.1 - connUnitId 1.3.6.1.3.94.1.6.1.1 - connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 - connUnitType 1.3.6.1.3.94.1.6.1.3 - connUnitNumports 1.3.6.1.3.94.1.6.1.4 - connUnitState 1.3.6.1.3.94.1.6.1.5 - connUnitStatus 1.3.6.1.3.94.1.6.1.6 - connUnitProduct 1.3.6.1.3.94.1.6.1.7 - connUnitSn 1.3.6.1.3.94.1.6.1.8 - connUnitUpTime 1.3.6.1.3.94.1.6.1.9 - connUnitUrl 1.3.6.1.3.94.1.6.1.10 - connUnitDomainId 1.3.6.1.3.94.1.6.1.
PAGE 220
9 FibreAlliance MIB overview - connUnitPortTable 1.3.6.1.3.94.1.10 - connUnitPortEntry 1.3.6.1.3.94.1.10.1 - connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 - connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 - connUnitPortType 1.3.6.1.3.94.1.10.1.3 - connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 - connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 - connUnitPortState 1.3.6.1.3.94.1.10.1.6 - connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 - connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 - connUnitPortModuleType 1.3.6.1.3.94.1.10.1.
PAGE 221
FibreAlliance MIB overview 9 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 - connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 - connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 - connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 - connUnitLinkAgentAddressY 1.3.6.1.3.94.1.
PAGE 222
9 FibreAlliance MIB overview - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 - connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 - connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 - connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 - connUnitPortStatCountBBCreditZero 1.
PAGE 223
FibreAlliance MIB overview 9 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 74 ConnUnitServiceScalars hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 - connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 - connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 - connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 - connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.
PAGE 224
9 Connectivity unit group TABLE 74 Definitions for FCMGMT-MIB (Continued) Type definition Value Description FcEventSeverity Integer 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status. 7 (notify) Notification status. 8 (info) Informational status. 9 (debug) Debug status. 10 (mark) All messages logged. FcUnitType Integer 1 (unknown) 2 (other) None of 3–14.
PAGE 225
Connectivity unit group 9 TABLE 75 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description uNumber 1.3.6.1.3.94.1.1 Read only The number of connectivity units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to one. systemURL 1.3.6.1.3.94.1.
PAGE 226
9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 Read only An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity unit or 16 octets of value 0. The following characteristics are required. • WWN formats requiring fewer than 16 octets must be extended to 16 octets with trailing 0 octets. • If a WWN is used for connUnitId, the same WWN must be used for connUnitGlobalId.
PAGE 227
Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitNumports 1.3.6.1.3.94.1.6.1.4 Read only Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (external). The Brocade switches support 0 to maximum number of system supported ports. NOTE: The ConnUnitNumports will not count the GE ports present on the FC4-16IP blade. The maximum number of supported ports are as follows.
PAGE 228
9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitSn 1.3.6.1.3.94.1.6.1.8 Read only The serial number for this connectivity unit. Set to the SSN (which by default is the WWN). connUnitUpTime 1.3.6.1.3.94.1.6.1.9 Read only The number of centiseconds since the last unit initialization. connUnitUrl 1.3.6.1.3.94.1.6.1.10 Read-write URL to launch a management application, if applicable; otherwise an empty string.
PAGE 229
Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitConfigurationCh angeTime 1.3.6.1.3.94.1.6.1.16 Read only The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime NOTE: This object is not supported. Fabric OS MIB Reference 53-1002750-01 connUnitNumRevs 1.3.6.1.
PAGE 230
9 Connectivity unit group TABLE 75 210 Object and OID Access Description connUnitControl 1.3.6.1.3.94.1.6.1.22 Read-write Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Cold start and warm start are as defined in MIB-II and are not meant to be a factory reset.
PAGE 231
Connectivity unit group 9 TABLE 75 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description connUnitRevsTable 1.3.6.1.3.94.1.7 Not accessible Table of the revisions supported by connectivity units managed by this agent. Usage Notes This table lists the versions of hardware and software elements in the switch. One entry for the hardware platform version and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware platform number is 32.0.
PAGE 232
9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Read only Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Returns the serial ID if this is for the power supply; otherwise, returns Null. connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 Read only This describes the status of the sensor as a message.
PAGE 233
Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitPortEntry 1.3.6.1.3.94.1.10.1 Not accessible Each entry contains the information for a specific port. connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 Read only The connUnitId value of the connectivity unit that contains this port. Same value as connUnitId. connUnitPortIndex 1.3.6.1.3.94.1.10.1.
PAGE 234
9 Connectivity unit group TABLE 75 214 Object and OID Access Description connUnitPortType 1.3.6.1.3.94.1.10.1.3 Read only The port type. For EX_Port, VEX_Port and VE_Port, the port type will be shown as other. For a Brocade Access Gateway device, the port type can be either F_Port (f-port) or N_Port (n-port) only. Possible values are: • unknown (1) • other (2) • not-present (3) • hub-port (4) • n-port (5) End port for fabric. • l-port (6) End port for loop. • fl-port (7) Public loop.
PAGE 235
Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Read only Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008.
PAGE 236
9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitPortTransmitter Type 1.3.6.1.3.94.1.10.1.8 Read only The technology of the port transceiver. Possible values are: • unknown (1) • other (2) • unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) • longwaveNoOFC (8) • shortwaveNoOFC (9) • longwaveLED (10) • ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper).
PAGE 237
Connectivity unit group 9 TABLE 75 Object and OID Access Description connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 Read only This is the assigned Fibre Channel ID of the port. If the port does not have a Fibre Channel address, this object return all bits set to 1. For an F_Port, this is the Fibre Channel ID to which the connected N_Port is assigned. For an FL_Port, this is the Fibre Channel ID of the FL_Port. For a U or E_Port, this is similar to F_Port.
PAGE 238
9 Connectivity unit group TABLE 75 218 Object and OID Access Description connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Read-write Controls the addressed connUnit’s port. Valid commands are: resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: • The Link Reset protocol. • The Loop Initialization protocol.
PAGE 239
Connectivity unit group 9 TABLE 75 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description connUnitPortControl 1.3.6.1.3.94.1.10.1.16 (continued) Read-write connUnitPortName 1.3.6.1.3.94.1.10.1.17 Read-write connUnitPortPhysicalNu mber 1.3.6.1.3.94.1.10.1.18 Read only This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex.
PAGE 240
9 Connectivity unit group TABLE 75 220 Object and OID Access Description connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 Read only This is the bit mask that specifies the driver-level protocol capability of this port. If this is not applicable, return all bits set to 0. Return value = 07F The bits have the following definition. • 0 = unknown • 1 = Loop • 2 = Fabric • 4 = SCSI • 8 = TCP/IP • 16 = VI • 32 = FICON connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.
PAGE 241
Connectivity unit group 9 TABLE 75 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description connUnitEventTable 1.3.6.1.3.94.1.11 Not accessible The table of connectivity unit events. Errors, warnings, and information should be reported in this table. This table contains the 1024 most-recent event log entries. Only external RASlog messages are supported. Fabric OS v4.4.0 and later releases do not have Panic or Debug level messages.
PAGE 242
9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 Read only This is the sysuptime time stamp when the event occurred. connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 Read only The event severity level.
PAGE 243
Connectivity unit group 9 TABLE 75 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description connUnitLinkTable 1.3.6.1.3.94.1.12 Not accessible A list of links known to this agent from this connectivity unit to other connectivity units- X is switch data and Y is other end.
PAGE 244
9 Connectivity unit group TABLE 75 224 Object and OID Access Description connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 Read only This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits.
PAGE 245
Statistics group 9 TABLE 75 Object and OID Access Description connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Read only Type of the FC connectivity unit, as defined in connUnitType. ISL- Switch device. End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 76 displays the types of the connectivity unit. connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 Read only This is the Fibre Channel ID of this port.
PAGE 246
9 Statistics group TABLE 77 Object and OID Access Description connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 Read only This object represents the port index. connUnitPortStatCountEr Read only ro 1.3.6.1.3.94.4.5.1.3 A count of the errors that have occurred on this port. connUnitPortStatCountTx Read only Objects 1.3.6.1.3.94.4.5.1.4 The number of frames that have been transmitted by this port. A Fibre Channel frame starts with SOF and ends with EOF.
PAGE 247
Statistics group 9 TABLE 77 Object and OID Access Description connUnitPortStatCountP RJTFrames 1.3.6.1.3.94.4.5.1.13 Read only The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port. Return Value - 800000000 This is the total for all classes and is a Fibre Channel only statistic. NOTE: This object is not supported. connUnitPortStatCountCl ass1RxFrames 1.3.6.1.3.94.4.5.1.
PAGE 248
9 Statistics group TABLE 77 Object and OID Access Description connUnitPortStatCountCl ass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 Read only The number of times that FBSY was returned to this port because Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic.
PAGE 249
Statistics group 9 TABLE 77 Object and OID Access connUnitPortStatCountTx Read only BroadcastObjects 1.3.6.1.3.94.4.5.1.32 Description The number of broadcast frames or packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated. Return value - 800000000 NOTE: This object is not supported. connUnitPortStatCountR xLinkResets 1.3.6.1.3.94.4.5.1.33 Read only The number of link resets received. This is a Fibre Channel only statistic.
PAGE 250
9 Service group TABLE 77 Object and OID Access Description connUnitPortStatCountIn validOrderedSets 1.3.6.1.3.94.4.5.1.45 Read only The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel only statistic. connUnitPortStatCountFr amesTooLong 1.3.6.1.3.94.4.5.1.46 Read only The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI.
PAGE 251
Service group 9 TABLE 78 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 Read only The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address). Chassis switches containing the FC4-16IP blade will have eight GbE ports and treated as iSCSI Virtual Initiator. These ports will be part of the name server (NS) database.
PAGE 252
9 SNMP trap registration group SNMP trap registration group TABLE 79 Object and OID Access Description trapMaxClients 1.3.6.1.3.94.2.1 Read only The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. trapClientCount 1.3.6.1.3.94.2.2 Read only The current number of rows in the trap table. trapRegTable 1.3.6.1.3.94.2.3 Not accessible A table containing a row for each IP address or port number to which traps are sent. trapRegEntry 1.3.6.1.3.94.2.3.
PAGE 253
Revision number scalar TABLE 81 9 trapRegRowState for Read/Write State Description (Read) Description (Write) rowDestroy (1) Can never happen. Remove this row from the table. rowInactive (2) Indicates that this row does exist but that traps are not enabled to be sent to the target. If the row does not exist and the agent allows writes to the trap table, then a new row is created. The values of the optional columns are set to default values. Traps are not enabled to be sent to the target.
PAGE 254
9 FibreAlliance MIB traps FibreAlliance MIB traps TABLE 83 Trap name and OID Variables connUnitStatusChan connUnitStatus ge connUnitState 1.3.6.1.3.94.0.1 Description The overall status of the connectivity unit has changed. Recommended severity level (for filtering) - alert. Generated when connUnitStatus changes. For a description of how the value is calculated, refer to “connUnitStatus” on page 207. Sample trap output for Fabric OS v6.1.0. connUnitStatus.16.0.0.96.105.144.109.136.0.0. 0.0.0.0.0.0.
PAGE 255
FibreAlliance MIB traps 9 TABLE 83 Trap name and OID Variables Description connUnitSensorStat usChange 1.3.6.1.3.94.0.5 connUnitSensorStatus Overall status of the connectivity unit has changed. This trap is generated whenever the status of the sensors (like fan, power supply, temperature) present in the connectivity unit changes. Sample trap output for Fabric OS v6.1.0. connUnitSensorStatus.16.0.0.96.105.144.109.13 6.0.0.0.0.0.0.0.0.
PAGE 256
9 236 FibreAlliance MIB traps Fabric OS MIB Reference 53-1002750-01
PAGE 257
Chapter 10 FibreAlliance Extension MIB Objects In this chapter • FibreAlliance extension MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SFP statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port configuration table for Fabric Assigned PWWN feature . . . . . . . . . . . • Port configuration table for encryption or compression feature . . . . . . . .
PAGE 258
10 FibreAlliance extension MIB overview - faExt (1.3.6.1.4.1.1588.2.1.1.1.28) - swSfpStatTable (1.3.6.1.4.1.1588.2.1.1.1.28.1) - swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 - swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 - swSfpVoltage 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 - swSfpCurrent 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3 - swSfpRxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4 - swSfpTxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5 - swSfpPoweronHrs 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.6 - swSfpUnitId 1.3.6.1.4.1.1588.2.
PAGE 259
SFP statistics table 10 SFP statistics table TABLE 85 Object and OID Access Description swSfpStatTable 1.3.6.1.4.1.1588.2.1.1.1.28.1 Not accessible This table represents the diagnostic statistics of Small Form-factor Pluggable (SFP) optical transceivers. swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1. 1 Not accessible An entry containing the diagnostic statistics of SFPs. swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1. 1.1 Read only This object identifies the temperature of the SFP.
PAGE 260
10 Port configuration table for encryption or compression feature TABLE 86 Object and OID Access Description swPortFapwwnConfigEnable Read only 1.3.6.1.4.1.1588.2.1.1.1.28.2. 1.1.1 This object indicates whether or not the FAPWWN is enabled on the port: • true (1) • false (2) swPortFapwwnConfigFapwwn Read only 1.3.6.1.4.1.1588.2.1.1.1.28.2. 1.1.2 The object represents the FAPWWN assigned to the port. It returns the WWN irrespective of the state of the FAPWWN. swPortFapwwnConfigType Read only 1.3.6.
PAGE 261
Switch connectivity unit port table 10 Switch connectivity unit port table TABLE 88 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description swConnUnitPortTable 1.3.6.1.4.1.1588.2.1.1.1.28.4 Not accessible This table represents the port entry of the connectivity unit. swConnUnitPortEntry 1.3.6.1.4.1.1588.2.1.1.1.28.4.1 Not accessible This represents the port entry of the connectivity unit. swConnUnitPortCapableSpeeds 1.3.6.1.4.1.1588.2.1.1.1.28.4.
PAGE 262
10 242 Switch connectivity unit port table Fabric OS MIB Reference 53-1002750-01
PAGE 263
Chapter 11 FCIP MIB Objects In this chapter • FCIP MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP entity instance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP link table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP TCP connection table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP extended link table . .
PAGE 264
11 FCIP MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 + fcipTcpConnTable .6 FIGURE 78 High level organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.
PAGE 265
FCIP entity instance table 11 - fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.3 fcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.1.1.4 fcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.1.1.5 fcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.1.1.6 fcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.1.1.7 fcipExtendedLinkConnectedCount 1.3.6.1.4.1.
PAGE 266
11 FCIP link table TABLE 89 Object and OID Access Description fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 Read create The Internet address for the entity, if configured. The format of this address is determined by the value of the fcipEntityAddressType object. fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 Read create A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests.
PAGE 267
FCIP TCP connection table 11 TABLE 90 Object and OID Access Description fcipLinkRemFcipEntityWWN 1.3.6.1.2.1.224.1.1.5.1.7 Read create The World Wide Name of the remote FC Fabric Entity. fcipLinkRemFcipEntityId 1.3.6.1.2.1.224.1.1.5.1.8 Read create The identifier for the remote FCIP entity. fcipLinkRemFcipEntityAddre ssType 1.3.6.1.2.1.224.1.1.5.1.9 Read create The type of Internet address contained in the corresponding instance of fcipLinkRemFcipEntityAddress.
PAGE 268
11 FCIP extended link table TABLE 92 Object and OID Access Description fcipExtendedLinkTable 1.3.6.1.4.1.1588.4.1 Not accessible This table contains statistical information about FCIP tunnel compression, retransmission, packet loss, and latency details. The information stored in this table is returned in response to portshow fciptunnel commands. fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 Not accessible A conceptual row of the FCIP extended link table containing additional statistics.
PAGE 269
FCIP connection statistics table 11 FCIP connection statistics table TABLE 93 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description fcipConnStatsTable 1.3.6.1.4.1.1588.4.2 Not accessible The table contains statistical information about FCIP tunnel compression, retransmission, packet loss, and latency details. This table also gives details about FCIP circuit statistics for the Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade.
PAGE 270
11 250 FCIP connection statistics table Fabric OS MIB Reference 53-1002750-01
PAGE 271
Chapter 12 iSCSI MIB Objects In this chapter • iSCSI MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI instance attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI node attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI session attributes table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI session statistics table . . . .
PAGE 272
12 iSCSI MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance + iscsiInstanceAttributesTable - iscsiPortal - iscsiTargetPortal - iscsiInitiatorPortal - iscsiNode + iscsiNodeAttributesTable - iscsiTarget - iscsiTgtAuthorization - iscsiInitiator - iscsiIntrAuthorization - iscsiSession + iscsiSessionAttributesTable + iscsiSessionStatsTable - iscsiConnection + isciConnectionAttributesTable FIGURE 84 High level organization - iscsiInstanceAt
PAGE 273
iSCSI MIB overview 12 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.
PAGE 274
12 iSCSI instance attributes table - iscsiConnectionAttributesEntry iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 iscsiCxnMaxRecvDataSegLength 1.3.
PAGE 275
iSCSI node attributes table 12 TABLE 94 Object and OID Access Description iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.6 Read only A UTF-8 string set by the manufacturer describing the version of the implementation of this instance. The format of this string is determined by the manufacturer. It is for information purposes, and is not related to the iSCSI specification version numbers. It is the same as that of the fabos version. iscsiInstPortalNumber 1.3.6.1.2.1.142.1.1.1.1.
PAGE 276
12 iSCSI node attributes table TABLE 95 Object and OID Access iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 Description A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator to target node at the remote end of the connection during a log in request or response. NOTE: This object is not supported. iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 A node can operate in a target role, initiator role, or both.
PAGE 277
iSCSI session attributes table 12 TABLE 95 Object and OID Access Description iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15 Read-write The minimum time, in seconds, to wait, after an initial wait (Time2Wait), for a possible active iSCSI task reassignment after an unexpected connection termination or a connection reset. NOTE: This object is not supported. iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 Read-write iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.
PAGE 278
12 iSCSI session attributes table TABLE 96 258 Object and OID Access Description iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 Read only If iscsiSsnDirection is Inbound, this object is a UTF-8 string that contains the name of the remote initiator. If this session is a discovery session that does not specify a particular initiator, this object contains a zero-length string. If iscsiSsnDirection is Outbound, this object contains a zero-length string. iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.
PAGE 279
iSCSI session statistics table 12 TABLE 96 Object and OID Access Description iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142.1.1.10.1.1.19 Read only False indicates that iSCSI data PDUs within sequences may be in any order. True Indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs. Default is true. iscsiSsnErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.10.1.1.
PAGE 280
12 iSCSI connection attributes table TABLE 97 Object and OID Access Description iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 Read only A Low Capacity shadow object of iscsiSsnTxDataOctets for those systems that do not support Counter64. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. NOTE: This object is not supported. iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.
PAGE 281
iSCSI connection attributes table 12 TABLE 98 Object and OID Access Description iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 Read only The transport protocol over which this connection is running. This is hard coded to tcp (6). iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 Read only The local transport protocol port used by this connection. This object cannot have the value zero, since it represents an established connection. This is hard coded to 3260. iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.
PAGE 282
12 262 iSCSI connection attributes table Fabric OS MIB Reference 53-1002750-01
PAGE 283
Chapter 13 SNMPv2 MIB Objects In this chapter • SNMPv2 MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP target address table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP target parameters table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP community table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 284
13 SNMP target address table - snmpTargetParamsTable 1.3.6.1.6.3.12.1.3 - snmpTargetParamsEntry 1.3.6.1.6.3.12.1.3.1 - snmpTargetParamsName 1.3.6.1.6.3.12.1.3.1.1 - snmpTargetParamsMPModel 1.3.6.1.6.3.12.1.3.1.2 - snmpTargetParamsSecurityModel 1.3.6.1.6.3.12.1.3.1.3 - snmpTargetParamsSecurityName 1.3.6.1.6.3.12.1.3.1.4 - snmpTargetParamsSecurityLevel 1.3.6.1.6.3.12.1.3.1.5 - snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 - snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.
PAGE 285
SNMP target parameters table 13 TABLE 99 Object and OID Access Description snmpTargetAddrParams 1.3.6.1.6.3.12.1.2.1.7 Read create The value of this object identifies an entry in the snmpTargetParamsTable. The identified entry contains SNMP parameters to be used when generating messages to be sent to this transport address. snmpTargetAddrStorageType 1.3.6.1.6.3.12.1.2.1.8 Read create The storage type for this conceptual row.
PAGE 286
13 SNMP community table TABLE 100 Object and OID Access Description snmpTargetParamsSecurityLevel 1.3.6.1.6.3.12.1.3.1.5 Read create The level of security to be used when generating SNMP messages using this entry. snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 Read create The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row. snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.
PAGE 287
SNMP community table 13 TABLE 101 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description snmpCommunityContextEngineID 1.3.6.1.6.3.18.1.1.1.4 Read create The contextEngineID indicating the location of the context in which the management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. The default value is the snmpEngineID of the entity in which this object is instantiated. snmpCommunityContextName 1.3.6.1.6.3.18.
PAGE 288
13 268 SNMP community table Fabric OS MIB Reference 53-1002750-01
PAGE 289
Chapter 14 USM MIB Objects In this chapter • USM MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 • USM statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 • USM user group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 USM MIB objects overview The descriptions of the MIB variables in this chapter come directly from the SNMP-USER-BASED-SM-MIB.
PAGE 290
14 USM statistics - usmMIBObjects (1.3.6.1.6.3.15.1) - usmStats 1.3.6.1.6.3.15.1.1 - usmStatsUnsupportedSecLevels 1.3.6.1.6.3.15.1.1.1 - usmStatsNotInTimeWindows 1.3.6.1.6.3.15.1.1.2 - usmStatsUnknownUserNames 1.3.6.1.6.3.15.1.1.3 - usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 - usmStatsWrongDigests 1.3.6.1.6.3.15.1.1.5 - usmStatsDecryptionErrors 1.3.6.1.6.3.15.1.1.6 - usmUser 1.3.6.1.6.3.15.1.2 - usmUserSpinLock 1.3.6.1.6.3.15.1.2.1 - usmUserTable 1.3.6.1.6.3.15.1.2.2 - usmUserEntry 1.3.6.1.6.3.15.1.2.
PAGE 291
USM user group 14 USM user group TABLE 103 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description usmUserSpinLock 1.3.6.1.6.3.15.1.2.1 Read-write An advisory lock used to allow several cooperating Command Generator Applications to coordinate their use of facilities to alter secrets in the usmUserTable. usmUserTable 1.3.6.1.6.3.15.1.2.2 Not accessible The table of users configured in the SNMP engine's Local Configuration Datastore (LCD). usmUserEntry 1.3.6.1.6.3.15.1.2.2.
PAGE 292
14 USM user group TABLE 103 272 Object and OID Access Description usmUserOwnPrivKeyCha nge 1.3.6.1.6.3.15.1.2.2.1.1 0 Read create Behaves exactly as usmUserPrivKeyChange, with one notable difference: For the Set operation to succeed, the usmUserName of the operation requester must match the usmUserName that indexes the row which is targeted by this operation. In addition, the USM security model must be used for this operation. usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.
PAGE 293
Chapter IEEE 802.1x PAE MIB Objects 15 In this chapter • IEEE 802.1x PAE MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 • Dot1x PAE system group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 • Dot1x PAE authenticator group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 IEEE 802.1x PAE MIB objects overview The descriptions of the MIB variables in this chapter come directly from the IEEE 802.1x PAE MIB.
PAGE 294
15 IEEE 802.1x PAE MIB objects overview - dot1xPaeAuthenticator - dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 - dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 - dot1xAuthPaeState 1.0.8802.1.1.1.1.2.1.1.1 - dot1xAuthBackendAuthState 1.0.8802.1.1.1.1.2.1.1.2 - dot1xAuthAdminControlledDirections 1.0.8802.1.1.1.1.2.1.1.3 - dot1xAuthOperControlledDirections 1.0.8802.1.1.1.1.2.1.1.4 - dot1xAuthAuthControlledPortStatus 1.0.8802.1.1.1.1.2.1.1.5 - dot1xAuthAuthControlledPortControl 1.0.8802.1.1.1.1.2.1.1.
PAGE 295
Dot1x PAE system group 15 - dot1xAuthSessionStatsTable 1.0.8802.1.1.1.1.2.4 - dot1xAuthSessionStatsEntry 1.0.8802.1.1.1.1.2.4.1 - dot1xAuthSessionOctetsRx 1.0.8802.1.1.1.1.2.4.1.1 - dot1xAuthSessionOctetsTx 1.0.8802.1.1.1.1.2.4.1.2 - dot1xAuthSessionFramesRx 1.0.8802.1.1.1.1.2.4.1.3 - dot1xAuthSessionFramesTx 1.0.8802.1.1.1.1.2.4.1.4 - dot1xAuthSessionId 1.0.8802.1.1.1.1.2.4.1.5 - dot1xAuthSessionAuthenticMethod 1.0.8802.1.1.1.1.2.4.1.6 - dot1xAuthSessionTime 1.0.8802.1.1.1.1.2.4.1.
PAGE 296
15 Dot1x PAE authenticator group Dot1x PAE authenticator group TABLE 105 276 object and OID Access Description dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 Not accessible A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 Not accessible The configuration information for an authenticator PAE. dot1xAuthPaeState 1.0.8802.1.
PAGE 297
Dot1x PAE authenticator group 15 TABLE 105 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description dot1xAuthServerTimeout 1.0.8802.1.1.1.1.2.1.1.1 0 Read-write The value, in seconds, of the serverTimeout constant currently in use by the backend authentication state machine. dot1xAuthMaxReq 1.0.8802.1.1.1.1.2.1.1.1 1 Read-write The value of the maxReq constant currently in use by the backend authentication state machine. dot1xAuthReAuthPeriod 1.0.8802.1.1.1.1.2.1.1.
PAGE 298
15 Dot1x PAE authenticator group TABLE 105 278 object and OID Access Description dot1xAuthInvalidEapolFr amesRx 1.0.8802.1.1.1.1.2.2.1.9 Read only The number of EAPOL frames that have been received by this authenticator in which the frame type is not recognized. dot1xAuthEapLengthErro rFramesRx 1.0.8802.1.1.1.1.2.2.1.1 0 Read only The number of EAPOL frames that have been received by this authenticator in which the Packet Body Length field is invalid.
PAGE 299
Dot1x PAE authenticator group 15 TABLE 105 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description dot1xAuthAuthEapLogoff WhileAuthenticating 1.0.8802.1.1.1.1.2.3.1.9 Read only Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL logoff message being received from the supplicant. dot1xAuthAuthReauthsW hileAuthenticated 1.0.8802.1.1.1.1.2.3.1.
PAGE 300
15 Dot1x PAE authenticator group TABLE 105 object and OID Access Description dot1xAuthSessionStatsE ntry 1.0.8802.1.1.1.1.2.4.1 Not accessible The session statistics information for an authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active. dot1xAuthSessionOctets Rx 1.0.8802.1.1.1.1.2.4.1.
PAGE 301
Chapter 16 LLDP MIB Objects In this chapter • LLDP MIB objects overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP-EXT-DOT1-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP-EXT-DOT3-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 302
16 LLDP MIB objects overview - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpNotifications - lldpObjects - lldpConfiguration - lldpMessageTxInterval - lldpMessageTxHoldMultiplier - lldpReinitDelay - lldpTxDelay - lldpNotificationInterval - lldpPortConfigTable - lldpConfigManAddrTable - lldpStatistics - lldpStatsRemTablesLastChangeTime - lldpStatsRemTablesInserts - lldpStatsRemTablesDeletes - lldpStatsRemTablesDrops - lldpStatsRemTablesAgeouts - lldpStatsTxPortTable - lldpStatsRxPortT
PAGE 303
LLDP MIB objects overview 16 - lldpStatistics - lldpStatsRemTablesLastChangeTime 1.0.8802.1.1.2.1.2.1 - lldpStatsRemTablesInserts 1.0.8802.1.1.2.1.2.2 - lldpStatsRemTablesDeletes 1.0.8802.1.1.2.1.2.3 - lldpStatsRemTablesDrops 1.0.8802.1.1.2.1.2.4 - lldpStatsRemTablesAgeouts 1.0.8802.1.1.2.1.2.5 - lldpStatsTxPortTable 1.0.8802.1.1.2.1.2.6 - lldpStatsTxPortEntry 1.0.8802.1.1.2.1.2.6.1 - lldpStatsTxPortNum 1.0.8802.1.1.2.1.2.6.1.1 - lldpStatsTxPortFramesTotal 1.0.8802.1.1.2.1.2.6.1.
PAGE 304
16 LLDP MIB - lldpRemoteSystemsData - lldpRemTable 1.0.8802.1.1.2.1.4.1 - lldpRemEntry 1.0.8802.1.1.2.1.4.1.1 - lldpRemTimeMark 1.0.8802.1.1.2.1.4.1.1.1 - lldpRemLocalPortNum 1.0.8802.1.1.2.1.4.1.1.2 - lldpRemIndex 1.0.8802.1.1.2.1.4.1.1.3 - lldpRemChassisIdSubtype 1.0.8802.1.1.2.1.4.1.1.4 - lldpRemChassisId 1.0.8802.1.1.2.1.4.1.1.5 - lldpRemPortIdSubtype 1.0.8802.1.1.2.1.4.1.1.6 - lldpRemPortId 1.0.8802.1.1.2.1.4.1.1.7 - lldpRemPortDesc 1.0.8802.1.1.2.1.4.1.1.8 - lldpRemSysName 1.0.8802.1.1.2.1.4.1.1.
PAGE 305
LLDP MIB 16 TABLE 106 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description lldpMessageTxHoldMulti plier 1.0.8802.1.1.2.1.1.2 Read-write The time-t o-live value expressed as a multiple of the lldpMessageTxInterval object.
PAGE 306
16 LLDP MIB TABLE 106 object and OID Access Description lldpPortConfigTLVsTxEna ble 1.0.8802.1.1.2.1.1.6.1.4 Read-write The object, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. lldpConfigManAddrTable 1.0.8802.1.1.2.1.1.7 Not accessible This table is not supported.
PAGE 307
LLDP MIB 16 TABLE 107 object and OID Access Description lldpStatsRxPortNum 1.0.8802.1.1.2.1.2.7.1.1 Not The index value used to identify the port component (contained in the accessible local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable. lldpStatsRxPortFramesDisc ardedTotal 1.0.8802.1.1.2.1.2.7.1.2 Read only The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason.
PAGE 308
16 LLDP MIB TABLE 108 288 object and OID Access Description lldpLocPortTable 1.0.8802.1.1.2.1.3.7 Not accessible This table contains one or more rows per port information associated with the local system known to this agent. lldpLocPortEntry 1.0.8802.1.1.2.1.3.7.1 Not accessible The information about a particular port component. Entries may be created and deleted in this table by the agent. lldpLocPortNum 1.0.8802.1.1.2.1.3.7.1.
PAGE 309
LLDP MIB 16 LLDP remote systems data group TABLE 109 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description lldpRemoteSystemsData 1.0.8802.1.1.2.1.4 Not LLDP remote systems data group. accessible lldpRemTable 1.0.8802.1.1.2.1.4.1 Not This table contains one or more rows per physical network connection accessible known to this agent. and keeps a local copy of the information retrieved. lldpRemEntry 1.0.8802.1.1.2.1.4.1.
PAGE 310
16 LLDP MIB TABLE 109 290 object and OID Access Description lldpRemManAddr 1.0.8802.1.1.2.1.4.2.1.2 Not The string value used to identify the management address component accessible associated with the remote system. The purpose of this address is to contact the management entity. lldpRemManAddrIfSubtype Read only 1.0.8802.1.1.2.1.4.2.1.3 The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
PAGE 311
LLDP-EXT-DOT1-MIB 16 LLDP-EXT-DOT1-MIB The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. LLDP-EXT-DOT1-MIB organization Figure 104 and Figure 105 depict the organization and structure of the LLDP-EXT-DOT1-MIB.
PAGE 312
16 LLDP-EXT-DOT1-MIB - lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 - lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1 - lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1 - lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2 - lldpXdot1ConfigVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.1.2.1 - lldpXdot1ConfigVlanNameTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.2.1.1 - lldpXdot1ConfigProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.3 - lldpXdot1ConfigProtoVlanEntry 1.0.
PAGE 313
LLDP-EXT-DOT1-MIB 16 lldpXdot1 configuration group TABLE 110 object and OID Access Description lldpXdot1Config 1.0.8802.1.1.2.1.5.329 62.1.1 Not accessible IEEE 802.1 configuration group. lldpXdot1ConfigPortVlan Table 1.0.8802.1.1.2.1.5.329 62.1.1.1 Not accessible A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports. This table returns value only for the TE interfaces that are associated with the VLAN. lldpXdot1ConfigPortVlan Entry 1.0.8802.1.1.2.1.5.
PAGE 314
16 LLDP-EXT-DOT1-MIB TABLE 110 object and OID Access Description lldpXdot1ConfigProtocol Entry 1.0.8802.1.1.2.1.5.329 62.1.1.4.1 Not accessible The LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted.
PAGE 315
LLDP-EXT-DOT1-MIB 16 TABLE 111 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description lldpXdot1LocProtoVlanSupp orted 1.0.8802.1.1.2.1.5.32962. 1.2.2.1.2 Read only The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs. lldpXdot1LocProtoVlanEnab led 1.0.8802.1.1.2.1.5.32962. 1.2.2.1.
PAGE 316
16 LLDP-EXT-DOT1-MIB lldpXdot1 remote data group TABLE 112 296 object and OID Access Description lldpXdot1RemoteData lldpXdot1RemTable 1.0.8802.1.1.2.1.5.329 62.1.3 Not accessible IEEE 802.1 remote system information. lldpXdot1RemTable 1.0.8802.1.1.2.1.5.329 62.1.3.1 Not accessible This table contains one or more rows per physical network connection known to this agent. lldpXdot1RemEntry 1.0.8802.1.1.2.1.5.329 62.1.3.1.1 Not accessible The information about a particular port component.
PAGE 317
LLDP-EXT-DOT3-MIB 16 TABLE 112 object and OID Access Description lldpXdot1RemVlanName 1.0.8802.1.1.2.1.5.329 62.1.3.3.1.2 Read only The string value used to identify VLAN name identified by the VLAN ID associated with the remote system. lldpXdot1RemProtocolTa ble 1.0.8802.1.1.2.1.5.329 62.1.3.4 Not accessible This table contains one or more rows per protocol information about the remote system, received on the given port. lldpXdot1RemProtocolEn try 1.0.8802.1.1.2.1.5.329 62.1.3.4.
PAGE 318
16 LLDP-EXT-DOT3-MIB - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpObjects - lldpExtensions - lldpXdot3MIB - lldpXdot3Objects - lldpXdot3Config - lldpXdot3PortConfigTable - lldpXdot3LocalData - lldpXdot3LocPortTable - lldpXdot3LocPowerTable - lldpXdot3LocLinkAggTable - lldpXdot3LocMaxFrameSizeTable - lldpXdot3RemoteData - lldpXdot3RemPortTable - lldpXdot3RemLinkAggTable - lldpXdot3RemMaxFrameSizeTable FIGURE 106 LLDP-EXT-DOT3-MIB overall tree structure - lldpXdot3PortConfigTable 1
PAGE 319
LLDP-EXT-DOT3-MIB 16 lldpXdot3 configuration group TABLE 113 object and OID Access Description lldpXdot3Config 1.0.8802.1.1.2.1.5.4623.1.1 Not accessible IEEE 802.3 configuration information. lldpXdot3PortConfigTable 1.0.8802.1.1.2.1.5.4623.1.1.1 Not accessible A table that controls selection of LLDP TLVs to be transmitted on individual ports. lldpXdot3PortConfigEntry 1.0.8802.1.1.2.1.5.4623.1.1.1. 1 Not accessible The LLDP configuration information that controls the transmission of IEEE 802.
PAGE 320
16 LLDP-EXT-DOT3-MIB TABLE 114 300 object and OID Access Description lldpXdot3LocPortAutoNe gAdvertisedCap 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.3 Read only This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system. lldpXdot3LocPortOperMa Read only uType 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.4 An integer value that indicates the operational MAU type of the given port on the local system.
PAGE 321
LLDP-EXT-DOT3-MIB 16 lldpXdot3 remote data group TABLE 115 Fabric OS MIB Reference 53-1002750-01 object and OID Access Description lldpXdot3RemoteData 1.0.8802.1.1.2.1.5.462 3.1.3 Not accessible IEEE 802.3 remote devices information. lldpXdot3RemPortTable 1.0.8802.1.1.2.1.5.462 3.1.3.1 Not accessible This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system. lldpXdot3RemPortEntry 1.0.8802.1.1.2.1.5.462 3.1.3.1.
PAGE 322
16 LLDP-EXT-DOT3-MIB TABLE 115 302 object and OID Access Description lldpXdot3RemMaxFrame SizeTable 1.0.8802.1.1.2.1.5.462 3.1.3.4 Not accessible This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system. lldpXdot3RemMaxFrame SizeEntry 1.0.8802.1.1.2.1.5.462 3.1.3.4.1 Not accessible The maximum frame size information about a particular port component. lldpXdot3RemMaxFrame Size 1.0.8802.1.1.2.1.5.462 3.1.3.
PAGE 323
Chapter IEEE 802.3 LAG MIB Objects 17 In this chapter • IEEE 802.3 LAG MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 • Aggregator group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305 • Aggregator port group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 IEEE 802.3 LAG MIB overview The descriptions of the MIB variables in this chapter come directly from the IEEE 802.
PAGE 324
17 IEEE 802.3 LAG MIB overview - dot3adAggTable 1.2.840.10006.300.43.1.1.1 - dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 - dot3adAggIndex 1.2.840.10006.300.43.1.1.1.1.1 - dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.2 - dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.3 - dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.4 - dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.5 - dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.6 - dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.
PAGE 325
Aggregator group 17 - dot3adAggPortStatsTable 1.2.840.10006.300.43.1.2.2 - dot3adAggPortStatsEntry 1.2.840.10006.300.43.1.2.2.1 - dot3adAggPortStatsLACPDUsRx 1.2.840.10006.300.43.1.2.2.1.1 - dot3adAggPortStatsMarkerPDUsRx 1.2.840.10006.300.43.1.2.2.1.2 - dot3adAggPortStatsMarkerResponsePDUsRx 1.2.840.10006.300.43.1.2.2.1.3 - dot3adAggPortStatsUnknownRx 1.2.840.10006.300.43.1.2.2.1.4 - dot3adAggPortStatsIllegalRx 1.2.840.10006.300.43.1.2.2.1.5 - dot3adAggPortStatsLACPDUsTx 1.2.840.10006.300.43.1.2.2.1.
PAGE 326
17 Aggregator group TABLE 116 306 object and OID Access Description dot3adAggActorSystemP riority 1.2.840.10006.300.43. 1.1.1.1.3 Read-write A 2-octet read-write value indicating the priority value associated with the actor's system ID. dot3adAggActorSystemI D 1.2.840.10006.300.43. 1.1.1.1.4 Read only A 6-octet read-write MAC address value used as a unique identifier for the system that contains this aggregator. dot3adAggAggregateOrIn dividual 1.2.840.10006.300.43. 1.1.1.1.
PAGE 327
Aggregator port group 17 Aggregator port group TABLE 117 object and OID Access Description dot3adAggPortTable 1.2.840.10006.300.43.1. 2.1 Not accessible A table that contains link aggregation control configuration information about every aggregation port associated with the device. A row appears in this table for each physical port. dot3adAggPortEntry 1.2.840.10006.300.43.1. 2.1.1 Not accessible A list of link aggregation control configuration parameters for each aggregation port on the device.
PAGE 328
17 Aggregator port group TABLE 117 object and OID Access Description dot3adAggPortPartnerOpe rSystemID 1.2.840.10006.300.43.1. 2.1.1.9 Read only A 6-octet read-only MAC address value representing the current value of the aggregation port's protocol partner's system ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol partner.
PAGE 329
Aggregator port group 17 TABLE 117 object and OID Access Description dot3adAggPortPartnerOpe rPortPriority 1.2.840.10006.300.43.1. 2.1.1.19 Read only The priority value assigned to this aggregation port by the partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol partner. This is a 16-bit value. dot3adAggPortActorAdmin State 1.2.840.10006.300.43.1. 2.1.1.
PAGE 330
17 Aggregator port group TABLE 117 object and OID Access Description dot3adAggPortStatsIllegal Rx 1.2.840.10006.300.43.1. 2.2.1.5 Read only The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). dot3adAggPortStatsLACPD Read only UsTx 1.2.840.10006.300.43.1. 2.2.1.6 310 The number of LACP PDUs transmitted on this Aggregation Port. dot3adAggPortStatsMarke rPDUsTx 1.2.840.10006.300.43.1.
PAGE 331
Aggregator port group 17 TABLE 117 object and OID Access Description dot3adAggPortDebugActor ChurnState 1.2.840.10006.300.43.1. 2.3.1.5 Read only The state of the Actor Churn detection machine (43.4.17) for the aggregation port. Valid values: • noChurn - Indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state • churn - Indicates that the state machine is in the ACTOR_CHURN state. dot3adAggPortDebugPart nerChurnState 1.2.840.10006.300.43.1. 2.3.1.
PAGE 332
17 312 Aggregator port group Fabric OS MIB Reference 53-1002750-01
PAGE 333
Chapter 18 Bridge-MIB Objects In this chapter • Bridge-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Bridge-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • P-Bridge MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Q-Bridge MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RSTP MIB . .
PAGE 334
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - dot1dNotifications 1.3.6.1.2.1.17.0 - dot1d base group - dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 - dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 - dot1dBaseType 1.3.6.1.2.1.17.1.3 - dot1dStp group - dot1dStpProtocolSpecification 1.3.6.1.2.1.17.2.1 - dot1dStpPriority 1.3.6.1.2.1.17.2.2 - dot1dStpTimeSinceTopologyChange 1.3.6.1.2.1.17.2.3 - dot1dStpTopChanges 1.3.6.1.2.1.17.2.4 - dot1dStpDesignatedRoot 1.3.6.1.2.1.17.2.5 - dot1dStpRootCost 1.3.6.1.2.1.17.2.
PAGE 335
Bridge-MIB overview 18 - dot1dBridge 1.3.6.1.2.1.17 - dot1dTp - dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6 - dot1dTpPortOverflowEntry 1.3.6.1.2.1.17.4.6.1 - dot1dTpPortInOverflowFrames 1.3.6.1.2.1.17.4.6.1.1 - dot1dTpPortOutOverflowFrames 1.3.6.1.2.1.17.4.6.1.2 - dot1dTpPortInOverflowDiscards 1.3.6.1.2.1.17.4.6.1.3 - pBridgeMIB - pBridgeMIBObjects - dot1dExtBase - dot1dDeviceCapabilities 1.3.6.1.2.1.17.6.1.1.1 - dot1dTrafficClassesEnabled 1.3.6.1.2.1.17.6.1.1.2 - dot1dGmrpStatus 1.3.6.1.2.1.17.6.1.1.
PAGE 336
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - qBridgeMIB - qBridgeMIBObjects - dot1qBase - dot1qVlanVersionNumber 1.3.6.1.2.1.17.7.1.1.1 - dot1qMaxVlanId 1.3.6.1.2.1.17.7.1.1.2 - dot1qMaxSupportedVlans 1.3.6.1.2.1.17.7.1.1.3 - dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 - dot1qGvrpStatus 1.3.6.1.2.1.17.7.1.1.5 - dot1qTp - dot1qFdbTable 1.3.6.1.2.1.17.7.1.2.1 - dot1qFdbEntry 1.3.6.1.2.1.17.7.1.2.1.1 - dot1qFdbId 1.3.6.1.2.1.17.7.1.2.1.1.1 - dot1qFdbDynamicCount 1.3.6.1.2.1.17.7.1.2.1.
PAGE 337
Bridge-MIB 18 - dot1qVlan - dot1qVlanCurrentTable 1.3.6.1.2.1.17.7.1.4.2 - dot1qVlanCurrentEntry 1.3.6.1.2.1.17.7.1.4.2.1 - dot1qVlanTimeMark 1.3.6.1.2.1.17.7.1.4.2.1.1 - dot1qVlanIndex 1.3.6.1.2.1.17.7.1.4.2.1.2 - dot1qVlanFdbId 1.3.6.1.2.1.17.7.1.4.2.1.3 - dot1qVlanCurrentEgressPorts 1.3.6.1.2.1.17.7.1.4.2.1.4 - dot1qVlanCurrentUntaggedPorts 1.3.6.1.2.1.17.7.1.4.2.1.5 - dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 - dot1qVlanCreationTime 1.3.6.1.2.1.17.7.1.4.2.1.7 - dot1qVlanStaticTable 1.3.6.1.2.1.17.7.
PAGE 338
18 Bridge-MIB Bridge-MIB traps TABLE 118 Trap name and OID Description dot1dNotifications 1.3.6.1.2.1.17.0 Notifications for the Spanning Tree Protocol. newRoot 1.3.6.1.2.1.17.0.1 This notification indicates that the sending agent is the new root of the Spanning Tree. It is sent by a bridge soon after its election as the new root. topologyChange 1.3.6.1.2.1.17.0.
PAGE 339
Bridge-MIB 18 TABLE 119 Object and OID Access Description dot1dBasePortCircuit 1.3.6.1.2.1.17.1.4.1.3 Read only This object contains the name of an object unique to this port. For example, when multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an object instance (for example, the first) associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value {0 0}.
PAGE 340
18 Bridge-MIB TABLE 120 320 Object and OID Access Description dot1dStpRootPort 1.3.6.1.2.1.17.2.7 Read only The port number of the port that offers the lowest cost path from this bridge to the root bridge. dot1dStpMaxAge 1.3.6.1.2.1.17.2.8 Read only The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. dot1dStpHelloTime 1.3.6.1.2.1.17.2.
PAGE 341
Bridge-MIB 18 TABLE 120 Object and OID Access Description dot1dStpPortState 1.3.6.1.2.1.17.2.15.1.3 Read only The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. Values: • disabled (1) • blocking (2) • listening (3) • learning (4) • forwarding (5) • broken (6) dot1dStpPortEnable 1.3.6.1.2.1.17.2.15.1.4 Read-write The enabled or disabled status of the port.
PAGE 342
18 Bridge-MIB TABLE 121 Object and OID Access Description dot1dTpFdbTable 1.3.6.1.2.1.17.4.3 Not accessible A table that contains information about unicast entries for which the bridge has forwarding and filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. dot1dTpFdbEntry 1.3.6.1.2.1.17.4.3.
PAGE 343
Bridge-MIB 18 TABLE 121 Object and OID Access Description dot1dTpPortOutFrames 1.3.6.1.2.1.17.4.4.1.4 Read only The number of frames that have been transmitted by this port to its segment. NOTE: A frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including the bridge management frames. dot1dTpPortInDiscards 1.3.6.1.2.1.17.4.4.1.
PAGE 344
18 P-Bridge MIB P-Bridge MIB The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998, including Restricted Group Registration defined by IEEE 802.1t-2001. The following tables are not supported: • • • • • • dot1dTpHCPortTable dot1dUserPriorityRegenTable dot1dTrafficClassTable dot1dPortOutboundAccessPriorityTable dot1dPortGarpTable dot1dPortGmrpTable TABLE 123 324 Object and OID Access Description dot1dBase 1.3.6.1.2.1.17.
PAGE 345
P-Bridge MIB 18 dot1dExtBase group TABLE 124 Fabric OS MIB Reference 53-1002750-01 Object and OID Access Description dot1dDeviceCapabilities 1.3.6.1.2.1.17.6.1.1.1 Read only Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by the device and are manageable through this MIB. The capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
PAGE 346
18 Q-Bridge MIB dot1dPriority group TABLE 125 Object and OID Access Description dot1dPortPriorityTable 1.3.6.1.2.1.17.6.1.2.1 Not accessible A table that contains information about every port that is associated with this transparent bridge. dot1dPortPriorityEntry 1.3.6.1.2.1.17.6.1.2.1.1 Not accessible A list of default user priorities for each port of a transparent bridge. This is indexed by dot1dBasePort. dot1dPortDefaultUserPriori ty 1.3.6.1.2.1.17.6.1.2.1.1.
PAGE 347
Q-Bridge MIB 18 TABLE 126 Object and OID Access Description dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 Read only The current number of IEEE 802.1Q VLANs that are configured in the device. dot1qGvrpStatus 1.3.6.1.2.1.17.7.1.1.5 Read-write The administrative status requested by management for GVRP. The value enabled (1) indicates that GVRP should be enabled on the device, on all ports for which it has not been specifically disabled.
PAGE 348
18 Q-Bridge MIB TABLE 127 328 Object and OID Access Description dot1qTpFdbStatus 1.3.6.1.2.1.17.7.1.2.2.1.3 Read only The status of this entry. Values: • other (1) - This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
PAGE 349
Q-Bridge MIB 18 TABLE 127 Object and OID Access Description dot1qForwardAllForbidden Ports 1.3.6.1.2.1.17.7.1.2.4.1.3 Read-write The set of ports configured by the management in this VLAN for which the service requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. dot1qForwardUnregistered Table 1.3.6.1.2.1.17.7.1.2.
PAGE 350
18 Q-Bridge MIB TABLE 128 330 Object and OID Access Description dot1qStaticUnicastStatus 1.3.6.1.2.1.17.7.1.3.1.1.4 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • invalid (2) - Writing this value to the object removes the corresponding entry. • permanent (3) - This entry is currently in use and will remain so after the next reset of the bridge.
PAGE 351
Q-Bridge MIB 18 TABLE 128 Object and OID Access Description dot1qStaticMulticastForbid denEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 Read-write The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded, regardless of any dynamic information, for example, from GMRP. dot1qStaticMulticastStatus 1.3.6.1.2.1.17.7.1.3.2.1.5 Read-write This object indicates the status of this entry.
PAGE 352
18 Q-Bridge MIB TABLE 129 Object and OID Access Description dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 Read only This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • permanent (2) - This entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device.
PAGE 353
RSTP MIB 18 TABLE 129 Object and OID Access Description dot1qTpVlanPortOutFrame s 1.3.6.1.2.1.17.7.1.4.6.1.2 Read only The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes the bridge management frames originated by this device that are classified as belonging to this VLAN (for example, GMRP, but not GVRP or STP). dot1qTpVlanPortInDiscards Read only 1.3.6.1.2.1.17.7.1.4.6.1.
PAGE 354
18 RSTP MIB TABLE 130 334 object and OID Access Description dot1dStpPortAdminEdge Port 1.3.6.1.2.1.17.2.19.1.2 Read-write dot1dStpPortOperEdgeP ort 1.3.6.1.2.1.17.2.19.1.3 Read only The operational value of the edge port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the corresponding instance of dot1dStpPortAdminEdgePort is set, this object will be changed as well.
PAGE 355
Chapter 19 BD MIB Objects In this chapter • BD MIB objects overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 356
19 BD Traps - bdConfig - bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 - bdLThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.2 - bdCThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.3 - bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 - bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 - bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6 - nBdType 1.3.6.1.4.1.1588.2.1.1.51.1.7 FIGURE 121 bdConfig hierarchy - bdStats - bdNumOfEntries 1.3.6.1.4.1.1588.2.1.1.51.2.1 - bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2.2 - bdStatsEntry 1.3.6.1.4.1.1588.2.1.1.51.2.2.
PAGE 357
BD configuration 19 BD configuration The OID represents the Bottleneck configuration. NOTE When alerting is never enabled in the lifetime of the daemon, junk values are expected for alert-related parameters. When alerting is enabled before being disabled, non-junk values are expected for alert-related parameters. TABLE 132 Object and OID Access Description bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 Read only This object represents the status of bottleneck detection feature if enabled in the switch.
PAGE 358
19 BD statistics TABLE 133 Object and OID 338 Access Description bdNumOfEntries Read only 1.3.6.1.4.1.1588.2.1.1.51.2.1 The number of entries in the statistics table. bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2. 2 Not accessible The table of stats entries represents both types of BD. This can have maximum 30 samples per port for congestion bottleneck and 30 samples per port for latency bottleneck. Each sample in the statistics is taken every 10 seconds. bdStatsEntry 1.3.6.1.4.1.1588.2.1.1.51.2. 2.
PAGE 359
Appendix A MIB Object Groupings In this appendix • Switch variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Sensor variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Event variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 360
A Event variables • fcFxPortTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 • fcFxConfTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 • fcFxPortStatusTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 • fcFxPortPhysTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 • fcFxPortCapTable. . . .
PAGE 361
iSCSI instance information variables A iSCSI instance information variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. • iSCSI instance attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 • iSCSI node attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 • iSCSI session statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 362
A 342 iSCSI instance information variables Fabric OS MIB Reference 53-1002750-01
PAGE 363
Appendix B Mapping of CLI Counters to MIB Objects In this appendix • portStatsShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portErrShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portStats64Show command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 364
B portErrShow command TABLE 134 portStatsShow command (Continued) Counters MIB Object MIB OID er64_enc_out connUnitPortStatCountEncodingDisparityErrors 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 subtracted from connUnitPortStatCountInvalidTxWords er_bad_os connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 er_rx_c3_timeout swConnUnitC3DiscardDueToRXTimeout 1.3.6.1.4.1.1588.2.1.1.1.27.1.25 er_tx_c3_timeout swConnUnitC3DiscardDueToTXTimeout 1.3.6.1.4.1.1588.2.1.1.1.27.1.
PAGE 365
portStats64Show command TABLE 135 B portErrShow command (Continued) Counters MIB Object MIB OID too_long connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.46 bad_eof swConnUnitBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.15 enc_out connUnitPortStatCountEncodingDisparityErrors subtracted from connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 disc_c3 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 link_fail connUnitPortStatCountLinkFailures 1.3.6.1.3.
PAGE 366
B portShow command TABLE 136 portStats64Show command (Continued) Counters MIB Object MIB OID er64_enc_out connUnitPortStatCountEncodingDisparityErr ors subtracted from connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 er64_disc_c3 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.
PAGE 367
Index A accounting group, 84, 100 address translation group, 38 aggregator group, 305 aggregator port group, 307 B bd MIB, 335 before loading MIBs, 8 Bridge-MIB, 313 Brocade MIB files, 7 C capability group, 86, 101 commands, 20 errShow, 5 snmpConfig, 4, 20 switchStatusPolicySet, 5 configuration group, 77, 93 configuring SNMP, 20 connectivity group, 204, 254 CPU or memory usage group, 174 D definitions for entity MIB, 105 definitions for Fcfabric-Element-MIB, 91 definitions for Fcmgmt-MIB, 203, 254 defin
PAGE 368
high-availability group, 181 I ICMP group, 43 IEEE 802.1x MIB objects overview, 273 IEEE 802.1x PAE MIB, 273 IEEE 802.
PAGE 369
switchStatusPolicySet command, 5 sw-MIB system organization of MIB objects, 123 system group, 32, 141, 264 T TCP group, 45 textual conventions, 32, 59, 106, 189 toptalker group, 173 transmission group, 48 traps, 4 trunking group, 172 U UDP group, 47 understanding MIBs, 3 understanding SNMP bASICs, 2 unsupported tables, 233 unsupported traps, 234 usmMIBObjects group, 270 usmMIBObjects overview, 269 Fabric OS MIB Reference 53-1002750-01 349
PAGE 370
350 Fabric OS MIB Reference 53-1002750-01