Reference Guide

Port configuration
The following table provides information on ports that the switch uses. When configuring the switch for various policies, take into
consideration firewalls and other devices that may sit between switches in the fabric and your network or between the managers and the
switch.
TABLE 37 Port information
Port Type Common use Comment
22 TCP SSH, SCP
23 TCP Telnet Use the ipfilter command to block
the port.
80 TCP HTTP Use the ipfilter command to block
the port.
123 UDP NTP
161 UDP SNMP Disable the SNMP service on the
remote host if you do not use it, or
filter incoming UDP packets going
to this port.
443 TCP HTTPS Use the ipfilter command to block
the port.
Configuring Protocols
Brocade Fabric OS Administration Guide, 8.0.1
214 53-1004111-02