Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620

301

302

303

304

305

306

307

308

309

310

alias: bond 10:00:05:1e:a9:20:00:01; 3,5

alias: brain 11,4; 22,1; 33,6

alias: jake 4,7; 8,9; 14,11

alias: jeff 30:00:00:05:1e:a1:cd:02; 40:00:00:05:1e:a1:cd:04

alias: jones 7,3; 4,5

alias: zeus 4,7; 6,8; 9,2

Effective configuration:

No Effective configuration: (No Access)

Adding devices (members) to a zone

ATTENTION

The zoneAdd command will add

all

zone member aliases that match the "

aliasname_pattern

" in the zone database to the

specified zone.

Use the following procedure to add members to a zone:

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zoneAdd command, using either of the following syntaxes:

zoneadd "zonename", "member [; member...]"

zoneadd "zonename ", "aliasname_pattern* [;members ]"

NOTE

The zoneAdd command supports partial pattern matching ("wildcards") of zone member aliases. This allows you to

add multiple aliases that match the "

aliasname_pattern

" in the command line.

3. Enter the cfgSave command to save the change to the defined configuration.

The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile memory. If a transaction is open

on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A

message displays on the other switches to indicate that the transaction was aborted.

4. Enter the cfgShow command to view the changes.

Example for adding members to a zone

switch:admin> zoneadd matt, "ze*; bond*; j*"

switch:admin> cfgsave

switch:admin> cfgshow

Defined configuration:

zone: matt 30:06:00:07:1e:a2:10:20; 3,2; zeus; bond; jake; jeff; jones

zone: sloth bawn; bolt; bond; brain; 10:00:00:00:01:1e:20:20

alias: bawn 3,5; 4,8

alias: bolt 10:00:00:02:1f:02:00:01