Reference Guide

FIGURE 31 One-to-many Zoning example
One-to-many Zoning: One-to-many Zoning creates a zone with multiple hosts and one target. This approach creates fewer zones as
compared to Single-Initiator Zoning, but the host-to-host connectivity generates an extraneous amount of RSCN traffic. The Figure 31
shows an example of One-to-many Zoning where the hosts H1 to H8 are part of the same zone and can communicate with each other.
Administering Advanced Zoning
Brocade Fabric OS Administration Guide, 8.0.1
342 53-1004111-02