Reference Guide

Topology 2: ICLs
The following figure illustrates inter-chassis links (ICLs) between slots 5 and 8 in corresponding chassis. The letter E represents E_Ports
to be configured as D_Ports.
FIGURE 60 ICLs connecting chassis blades
Static-static, static-dynamic, and on-demand-dynamic D_Port modes are also supported on the ICLs.
Topology 3: Access Gateways
The following figure illustrates a switch configured as a single Access Gateway connected to a fabric switch. The letters N and F
represent, respectively, an N_Port and an F_Port to be configured as D_Ports.
The Access Gateway must be a Brocade 6505 or Brocade 6510.
Diagnostic Port
Brocade Fabric OS Administration Guide, 8.0.1
422 53-1004111-02