Reference Guide

Example to show the portname output
The portname command displays the switch name, port type, port index, and alias in the output. none indicates the error in alias name
and null indicates that the alias is not present.
switch:admin> portname
port 0: EDGE1_sw76.E_PORT.0
port 1: EDGE1_sw76..1
port 2: EDGE1_sw76..2
port 3: EDGE1_sw76..3
port 4: EDGE1_sw76..4
port 5: EDGE1_sw76..5
port 6: EDGE1_sw76.F_PORT.6.emlx
port 7: EDGE1_sw76.F_PORT.7.
port 8: EDGE1_sw76.F_PORT.8.
Example to show the portshow output
The portshow command displays the switch name, port type, port index, and alias in the output.
switch:admin> portshow 28
portIndex: 28
portName: sw78.E_PORT.28
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1000090b PRESENT ACTIVE E_PORT T_PORT T_MASTER G_PORT U_PORT LOGICAL_ONLINE LOGIN
LocalSwcFlags: 0x0
portType: 18.0
POD Port: Port is licensed
portState: 1 Online
Protocol: FC
portPhys: 6 In_Sync portScn: 16 E_Port Trunk master port Flow control mode 4
port generation number: 0
state transition count: 1
[output truncated]
Performing Advanced Configuration Tasks
Brocade Fabric OS Administration Guide, 8.0.1
78 53-1004111-02