Setup Guide

Brocade Fabric OS Message Reference 137
53-1004119-01
AUTH-1014
5
AUTH-1014
Message Invalid port value to <operation>: port <port number>.
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1016
Message Invalid value to start HBA authentication port: <port number>, pid <pid>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal failure.
Recommended
Action
Copy the message and collect the switch information using the supportShow command, and contact
your switch service provider.
AUTH-1017
Message Invalid value to start authentication request: port <port number>, operation code
<operation code>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.