Setup Guide

170 Brocade Fabric OS Message Reference
53-1004119-01
BL-1049
5
BL-1049
Message Serdestunemode: <serdestuning mode>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the SerDes tuning mode is changed for the slot.
Recommended
Action
No action is required.
BL-1050
Message Incompatible Blade Processor FPGA version with current FOS firmware in slot=<slot
number> on FX8-24. Contact support for upgrade instructions.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with current Fabric OS
firmware is incompatible on the FX8-24 blade.
Recommended
Action
Contact your switch service provider for upgrade instructions.
BL-1051
Message Incompatible Blade Processor FPGA version with current FOS firmware on 7800.
Contact support for upgrade instructions.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with current Fabric OS
firmware is incompatible on the Brocade 7800 switch.
Recommended
Action
Contact your switch service provider for upgrade instructions.