Setup Guide

Brocade Fabric OS Message Reference 281
53-1004119-01
EM-1220
5
EM-1220
Message A problem (Error:<The return code is for internal use only>) has been detected on
one or both WWN cards. Please run the wwnrecover tool to get more information and
recovery options.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a problem was found either accessing one (or both) of the WWN cards or with the content
of the data stored there. The content problem could be a corrupted data set or a mismatch between the
two WWN cards.
Recommended
Action
Execute the wwnrecover command to get details of the problems found and how to recover.
EM-1221
Message A WWN card insertion has been detected. WWN verification audit will be run to
ensure no mismatches or other problems.
Message Type LOG
Severity INFO
Probable Cause Indicates that the second WWN card was enabled. Because the data may not match, the WWN
verification audit will be run.
Recommended
Action
If an EM-1220 follows, execute the wwnrecover command to get details of the problems found and how
to recover. If not, no action is required.
EM-1222
Message A WWN card access problem has been encountered. Please run the wwnrecover tool to
get more information and recovery options.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a problem was encountered while accessing one (or both) of the WWN cards or with the
content of the data stored there.
Recommended
Action
Execute the wwnrecover command to get details of the problems found and how to recover.