Setup Guide

Brocade Fabric OS Message Reference 497
53-1004119-01
L2SS-1004
5
L2SS-1004
Message FDB error: Error in creating AVL tree.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Layer 2 system (L2SYS) has encountered an error while initializing the AVL tree.
Recommended
Action
Reboot or power cycle the switch.
L2SS-1005
Message MAC-address-table hash failed even after two attempts for slot <slot> chip <chip>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the media access control (MAC) address table hash failed even after two hash changes on
the specified chip.
Recommended
Action
Reboot or power cycle the switch.
L2SS-1006
Message MAC-address-table table on slot <Slot_id> chip <Chip_id> is 95 percent full.
Message Type LOG
Severity INFO
Probable Cause Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended
Action
Clear some of the entries using the no mac-address-table static command or wait until the old entries
age out.