Setup Guide

Brocade Fabric OS Message Reference 691
53-1004119-01
SEC-3046
5
SEC-3046
Message The FIPS Self Tests mode has been set to <Self Test Mode>.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates there was a change in the Federal Information Processing Standards (FIPS) Self Test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3047
Message Info: RBAC permission for a CLI command: <Cmd Name> is failed.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the user does not have permission to execute this command.
Recommended
Action
Verify the user has the required permission to execute this command.
SEC-3048
Message FIPS mode has been enabled in the system using force option.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Look for the status of the prerequisites that did not conform to FIPS mode.