Setup Guide

Brocade Fabric OS Message Reference 757
53-1004119-01
SULB-1053
5
SULB-1053
Message <firmware sync complete>
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicated that auto firmware synchronization has completed.
Recommended
Action
No action is required.
SULB-1054
Message Firmwaresync has started
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicated that firmware synchronization has started.
Recommended
Action
No action is required.
SULB-1055
Message Firmware upgrade on the blade in slot <Slot number> has completed.
Message Type AUDIT | LOG
Class FIRMWARE
Severity WARNING
Probable Cause Indicates that the firmware upgrade on the specified blade has completed.
Recommended
Action
No action is required. The firmwareDownload command has completed as expected.
Run the firmwareDownloadStatus command for more information. Run the firmwareShow command
to verify the firmware versions.