Setup Guide

Brocade Fabric OS Message Reference 823
53-1004119-01
ZONE-1062
5
ZONE-1062
Message Defined and Effective zone configurations are inconsistent.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the defined and effective configurations are different.
Recommended
Action
Execute the cfgEnable command to make both the configurations consistent.
ZONE-1064
Message Failed to update client capability to ESS (Exchange Switch Support) after maximum
number of retries - return code <Failed return code>. Failing sync dump to standby
CP.
Message Type LOG
Severity INFO
Probable Cause Indicates that Exchange Switch Support (ESS) is unable to update its capability. Failed to send the sync
dump to standby control processor (CP).
Recommended
Action
Verify that HA synchronization has failed using the haShow command. If HA synchronization has failed,
execute the haSyncStart command on active CP to resynchronize the HA state.
ZONE-1065
Message Zoning operation (<function>) at port index (<port index>) returns code (<error
code>). Port reset required.
Message Type LOG
Severity WARNING
Probable Cause Indicates hardware and software zoning enforcement is out of sync.
Recommended
Action
Toggle the port using the portDisable and portEnable commands in order to recover zoning
enforcement.