Setup Guide

TABLE 7 Access Gateway default port mapping (continued)
Brocade Model Total Ports F_Ports N_Ports Default port mapping
10 mapped to 37
11 mapped to 38
12 mapped to 39
13 mapped to 40
14 mapped to 41
15 mapped to 42
16 mapped to 43
17 mapped to 44
18 mapped to 45
19 mapped to 46
20 mapped to 47
6548 28 1–16 0, 17–27 1, 13 mapped to 0
2, 14 mapped to 17
3, 15 mapped to 18
4, 16 mapped to 19
5 mapped to 20
6 mapped to 21
7 mapped to 22
8 mapped to 23
9 mapped to 24
10 mapped to 25
11 mapped to 26
12 mapped to 27
G620 64 0–39 40–47 0-4 mapped to 40
5–9 mapped to 41
10–14 mapped to 42
15–19 mapped to 43
20–24 mapped to 44
25–29 mapped to 45
30–34 mapped to 46
35–39 mapped to 47
Considerations for initiator and target ports
The following connections are possible for the Fibre Channel Protocol (FCP) initiator (host) and target ports through an AG device:
∙ All F_Ports connect to all host ports.
∙ All F_Ports connect to all target ports.
∙ Some F_Ports connect to host ports and some F_Ports connect to target ports.
Configuring Ports in Access Gateway Mode
Brocade Fabric OS Access GatewayAdministration Guide
30 53-1004110-01