Setup Guide

∙ If you saved a Fabric OS configuration before enabling AG mode, download the configuration using the configDownload
command.
∙ If you want to rejoin the switch to the fabric using the fabric configuration, use the following procedure.
To rejoin the Fabric OS switch to a fabric, perform the following steps:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the switchDisable command to disable the switch.
3. Enter the defZone --allAccess command to allow the switch to merge with the fabric.
4. Enter the cfgSave command to commit the Default zone changes.
5. Enter the switchEnable command to enable the switch and allow it to merge with the fabric.
The switch automatically rejoins the fabric.
Reverting to a previous configuration
The following steps show how to revert to a previous configuration.
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the switchDisable command to disable the switch.
3. Enter the configDownload command to revert to the previous configuration.
4. Enter the switchEnable command to bring the switch back online.
The switch automatically joins the fabric.
SAN Configuration with Access Gateway
Brocade Fabric OS Access GatewayAdministration Guide
88 53-1004110-01