Reference Guide

Brocade Fabric OS Command Reference 991
53-1004112-02
secStatsReset
secStatsReset
Resets one or all security statistics to 0.
Synopsis secstatsreset [name][,"domain[;domain]"]
Description Use this command to reset one or all security statistics to 0. This command can be issued on any switch to reset
the security statistics on the local switch or chassis. If an FCS policy is enabled and secStatsReset is issued on the
primary FCS switch, this command can reset security statistics for any or all switches in the fabric.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands When invoked without operands, this command displays the security statistics on the local switch or chassis. The
following operands are optional:
name
Specify the name of a security statistic you would like to reset. The specified policy name
must be capitalized. If executed on the primary FCS, specify an asterisk (*) to reset all
security policies. Valid values for this operand include the following:
• TELNET_POLICY
• HTTP_POLICY
• SCC_POLICY
• DCC_POLICY
• LOGIN
• INVALID_CERT
• AUTH FAIL
• TS_OUT_SYNC
• NO_FCS
• INCOMP_DB
• ILLEGAL_CMD
To access DCC policies, enter DCC_POLICY. Violations are not tracked for individual DCC
policies. The statistics for all DCC_POLICY violations are grouped together.
domain(s)
Specify a list of domain IDs on which to reset the security statistics. Specify an asterisk (*) to
represent all switches in the fabric or specify a list of domains, separated by semicolons and
enclosed in quotation marks. This option can only be executed when an FCS policy is
enabled and when the command is issued from the primary FCS switch. When domain is
specified, the name operand is required.
Examples To reset all statistics on the local switch:
switch:admin> secstatsreset
About to reset all security counters.
ARE YOU SURE (yes, y, no, n):[no] y
Security statistics reset to zero.