Reference Guide

Brocade Fabric OS Command Reference 993

53-1004112-02

secStatsShow

Displays one or all security statistics.

Synopsis secstatsshow [name[,"domain[;domain]"]]

Description Use this command to display one or all security statistics. This command can be issued on any switch to display

local security statistics. If an FCS policy is enabled and secStatsShow is issued on the primary FCS switch, this

command can retrieve and display the security statistics for any or all switches in the fabric.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands When invoked without operands, this command displays the security statistics on the local switch or chassis. The

following operands are optional:

name

Specify the name of the security statistic you want to view. The specified policy name must

be capitalized. If executed on the primary FCS, specify an asterisk (*) to represent all security

policies in the fabric. Valid values for this operand include the following:

• TELNET_POLICY

• HTTP_POLICY

• SCC_POLICY

• DCC_POLICY

• LOGIN

• AUTH FAIL

• TS_OUT_SYNC

• NO_FCS

• INCOMP_DB

• ILLEGAL_CMD

To access DCC policies, enter DCC_POLICY. Violations are not tracked for individual DCC

policies. The statistics for all DCC_POLICY violations are grouped together.

The INVALID_CERT policy name is not supported.

domain

Specify one or more domains for which to display the security statistics. Specify an asterisk

(*) in quotation marks to represent all switches in the fabric or specify a list of domains

separated by semicolons. This option can only be executed when an FCS policy is enabled

and the command is issued from the primary FCS switch. When domain is specified, the

name operand is required.