Reference Guide

Brocade Fabric OS Command Reference 1001

53-1004112-02

setVerbose

Specifies module verbose level.

Synopsis setverbose [module_name][level]

Description Use this command to set the verbose level of the specified module. These levels filter the display of the debug

message to the serial console. By default, no debug messages are displayed.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operands:

module_name

Specify the name of the module for which the verbose level is to be set; module names are

case-sensitive.

level

Specify the verbose level (0 to 9).

Examples To set the verbose level of a module named NS to value 3:

switch:admin> setverbose NS 3

switch:admin> dbgshow NS

Module NS, debug level = 0, verbose level = 3